Pacific Image PrimeFilm XEs 35mm Film & Slide Scanner - 3-line RGB Linear CCD Sensor, 10,000 x 10,000 dpi, 48-bit

Product Information

The ones that you can get new today the software from what I read might be not as great but the scans comes out reasonably sharp. One could use 3rd party software. So why are CS going for such high prices successfully? The Epson Perfection V39 II Color Photo and Document Flatbed Scanner is a versatile unit for home and professional use. The problem with all current dedicated film scanners other than the very expensive Hassleblad Imacon, is that they have no focus/auto-focus facility. The film to imaging device is pre-set at manufacture. If this is made very accurately, you are OK but if as on my Plustek Opticfilm 7400, it is slightly wrong, no matter what you do, the end results are going to be soft. I also loathe Silverfast and Vuescan feels very elderly. My old Artixscan had autofocus and although only 4000 pixels/inch produced very sharp results until sadly a faulty Firewire 800 to SCSI interface killed it.

A film scanner is a device that scans film directly into a computer without first having to print it. The photographer no longer needs to make a print then scan that print. The intermediate step is completely illuminated with a film scanner. You can also apply modifications such as precise cropping and choosing different aspect ratios prior to printing. There is a company in Germany that is offering a new Nikon 5000ED for nearly €7000.00, it seems to be a rebuilt Nikon scanner, as it emphasises the new scanning camera and CCD sensor along with the inclusion of Silverfast softwares. The OpticFilm 8100 comes with SilverFast Multi-Exposure software that gives your images a higher dynamic range resulting in more shadow detail and less noise. It even has SilverFast NegaFix, a feature with over 120 profiles for negative film. NegaFix guarantees optimal results every time you convert your negatives into positives, too. Close the wizard and perform a system reboot to allow changes to take effect. About Scanner Drivers:I remember seeing rolls of Kosmo Foto sold all over camera stores in Tokyo as I travelled across Asia around the time of its launch. The Pacific Image PrimeFilm XE 35mm Film and Slide Scanner offers a cost-effective solution for film enthusiasts looking to digitize their 35mm film and slides. With its ease of use, versatile film format support, and high optical resolution, it provides excellent value for users seeking a straightforward and reliable scanning experience. Verdict

Tapping the physical ⏮ and ⏭ on PrimeFilm XA will move the film by about a millimetre in either direction. Holding those buttons down slightly longer before releasing will advance the film by about one frame. You can even initialize your ViewScan or SilverFast’s “Scan” command with the physical button, though I found it may cause issues in some cases. Just as the title says, what is your favorite 35mm film scanner? I'm already covered for medium and 4x5" film but am looking for 35mm solutions, if they cover other formats, so much the better I guess.Occasionally, there’s just one frame left from the strip, which PrimeFilm can not accept; this is when I insert the frame into a plastic slide frame I have handy and use the scanner’s slide frame tray. SilverFast vs. ViewScan. Higher color accuracy - Accurate color adjustment, resulting in vibrant images with optimal brightness, contrast and saturation Photochemistry typically does not have sharply defined edges for its dynamic ranges. The usable range of light intensities the film can effectively render is within the straight sloping line that stops being useful after plateauing horizontally on either end. The curves on each end of the dynamic range’s linear slope mean extended latitude that allow some over- and under-exposure beyond the optimal dynamic range estimates. Many film photographers use the Epson Perfection V600 and love it for its flexibility and versatility. You get a solid image quality (supplemented by Epson’s Digital ICE dust and scratch removal technology, which the scanner uses on both film and print scans) and improved compatibility with multiple formats via its holders.

Longitudinal chromatic aberrations or LoCAs are purple and green fringing seen in the out of focus areas in front of and behind the focus point of an image.LoCAs are common, especially with fast lenses, so chances almost all of your lenses have at least a trace, you just never noticed.The problem is that LoCAs are extremely difficult to correct with complex designs using special glass to fully correct the aberration.A professional-grade 35mm slide scanner, the Pacific Image PowerSlide X Automated Scanner makes batch workflows much easier to manage. The optical resolution is top notch, the color depth is impressive, and the resulting scans are accurate and detailed. You’ll also enjoy scans of up to 10,000 dpi, so you can comfortably enlarge scanned images into big, beautiful prints. Above are crops of the original scans, on the left the PF 3600 PRO and on the right the Minolta Scan Dual 3. The noise is plainly visible on the PF 3600 PRO, as is the low contrast.

My question is about scanning 35mm Kodachrome slides for professional use. What is the best solution out there? Is there a discernible difference between the output of, say, an Plustek 8200 and the 120? (By the way I’m aware of some challenges of Kodachrome, especially with ICE not being an option.) I need the highest possible quality because the images will be published to illustrate a book and many will also be projected in large auditoriums. On a more positive note, when you've got used to the quirkiness and often unreliability of this utility it is possible to get some scanning done. There's a reasonably high level of control provided through the Colour Balance and Levels & Curves settings. Once you got your archival method ready, you will need to make some space for your scanner. PrimeFilm accepts film on one side and pushes it to the other, which means that there needs to be additional space around your machine. Plustek presented the OpticFilm 120 Pro at Photokina this year. It offers a scanning resolution of 5300 dpi with a color depth of 48 bits. Its scan area is 60 mm × 120 mm. The unit comes with seven original 35 mm framed slides, 35 mm film strips and medium format film from 6 × 4.5 to 6 × 12. The film holders are each encoded in the Pro version so that the scanning software automatically detects and positions the slides.Optimal dynamic range - Multipass Xposure technology scans each frame or slide multipletimes to enhance the detail of dark area withoutsacrificing the bright area. On the left is the PF 3600 PRO scan and on the right, the Minolta Scan Dual III scan of the same slide. Whilst the PF 3600 PRO features a higher resolution on paper, the Minolta shows none of the appalling image noise and also has better colour definition. How much dynamic range do you need to capture? A scanner’s ability to capture a wide dynamic range from film is referred to as Dmax. The larger the Dmax, more detail the scanner is able to extract from the deepest, darkest shadows of film. Resolution Pacific Image Electronics might not be a familiar name to many over here in the UK. Their PrimeFilm 3600 Pro we're reviewing here is placed at the top of their range of film scanners. It is also, as far as we can tell identical to the Microtek 3600, other than a different colour exterior.