Inglenook 5 Piece Black And Chrome Fireset With Oval Handles

Product Information

LCD colour display electric and diesel control panel allowing easy to use operation and easy visual indication of current conditions. LPS1131 1.1 – Requirements and testing Methods for pumps for automatic sprinkler installation pump sets

EBW and EFI detonators were originally developed for use in military applications. They need a very fast rising, high-current pulse for successful initiation, such as the output provided by the Ecosse PX-1. Pumps can be produced in higher grade materials for specific pumped liquids ensuring reduction of corrosion damage and increasing longevity of the product. Connect the OUTPUT of the blaster to the INPUT of the PM-100 using RISI twin lead cable, P/N 167-8559.

switchgear fixed to a robust support structure. Model E for the electric motor and D for the diesel motor, both with a WiZiTouch controller by Tornatech. The primary application for this instrument is to supply a timing pulse upon detection of a flash. It has been used with a wide array of flash-producing items, including the following: Small arms, from pistols through small-bore rifles, minigun, and heavier caliber machine guns. Larger caliber tank guns and cannons. Various sizes of mortars. Shoulder-launched weapons. Explosives and flash-bang grenades. Unlike conventional hot-wire and hot-resistor detonators normally used in oilfield perforating operations, EBW and EFI detonators do not contain sensitive primary explosives such as lead azide.

NOTES: All safety features were tested and certified at Sandia National Laboratories by Orion International Technologies Inc. All tests were done at ambient temperature, and all tests (apart from the lightning strikes) were repeated at 93°C - 121°C.​ allow it to fit in virtually every gun system in use today, including pressure housings with an OD of 1-3/8”. standards that exceed any practical level of threat that might exist in the oilfield environment, including Uses - Provides for safe operation of all Explosive Services including Perforating, Pipe Recovery, Setting BSEN12845 – Fixed firefighting systems, automatic firefighting systems, design, installation and maintenancePlease note an 8 hour double-walled fuel tank is as per the requirements in Factory Mutual Datasheets. Within NFPA20 a single-walled fuel tank sized to 5.07 litres per kW is acceptable, which is also available upon request. What standards is this equipment approved / compliant to? within 3ft of the PX-1 itself. Particularly on offshore platforms, these safety features can result A wide selection of options and accessories are available including pump housing to facilitate the selection of the correct equipment. Typical high hazard applications are storage and distribution facilities, areas where chemicals exist and high rise buildings over 45m. Benefits Standard-equipped with an air vent valve und pressure gauge installed directly on the main pump housing

The purpose of the FS-43 Firing Module is to provide a significant amount of flexibility to this EBW detonator firing system. Since the firing pulse to function the EBW detonator must be applied at the proper rate of rise, or frequency, the firing module must be placed relatively close to the detonator. By being able to separate the Firing Module from the control unit, the operator can perform the detonation at extended distances as required by the size and characteristics of the main explosive charge. Convenient & Cost Effective - The PX-1 EBW fireset allows normal oilfield operation to continue while

High Hazard Fire Set

LPS1239 1.1 – Requirements and testing procedures for the LPCB Approval and listing of diesel engines for sprinkler pump sets