Rain X 600001 Windscreen Repair Kit - white/clear

Product Information

I bought this repair kit in h opes that I could stop the cracks from spidering across my windshield.

The Rain-X Additive allows you to keep your windscreen clean, helping to remove bug residue, tree sap and road grime from your car. I am NOT a professional with windshields or the repair thereof so use my suggestions at your own risk. Please note I shot these images on my phone camera (a semi-recent Samsung Note) so the picture quality isn’t amazing. When this happens the chip will be almost invisible and you should only see "maybe" thin transparent lines where there were any cracks extend out from the point of impact.I think the one thing people don't mention is doing the steps 4 and 5 at least 2 times, plus I added some heat to the inside of my windshield. Make sure there is no air bubble remaining in the break, by looking at the glass at an angle of 45 0. All I wanted this windshield repair kit to do is to minimise the appearance of the crack so that it didn’t distract me while driving almost 500km home on busy, winding roads, as well as try to prevent the crack from spreading and worsening. In tests conducted by an American University, better visibility improved drivers’ responses up to a full second or more - helping drivers make better decisions on the road.

Else, if you put the center ring centered on the chip itself you may actually be only applying resin to the surface of the windshield and not even touching the actual crack(s). What also really pleased me was the fact that I was able to do around 500km of driving in the days following the repair with no worsening of the crack. e. it was a full windshield replacement job) and that we would have to wait a week for this repair – by which time we were meant to be home anyway. For best results, repairs should be made as soon as possible after the damage occurs and before the break is contaminated by dirt or water. This is a twisty piece of road that effectively provides a shortcut over the mountains that separate Wanaka from Queenstown.He is particularly enthusiastic about JDM cars, although has also owned numerous European vehicles in the past. Rain‑X ® Windscreen Repair Kit helps to minimise the appearance and stop the spread of chips and cracks in your windscreen. Unscrew and remove pressure driver from the resin chamber to release any air trapped in the chamber. These are small plastic sheets that you drop on to the resin which then assist in the drying/curing process.

Be mindful that it may not work, when the crack is over 12 inches in length and extends to the edge of the windshield. The Rain-X Windscreen Washer Additive allows you to keep your windscreen clean, helping to remove bug residue, tree sap and road grime from your car.From screen wash to windscreen washer additives, Rain-X offer multiple products to help you keep your windscreen clean - find out more about these products below. If you’d prefer to have a professional tackle this task, check out our specialty detailing services, weoffer world class windshield repair. Just as bad when you then try to apply a little pressure the resin can be forced out through the foam. Since the chip was in a hidden corner of the glass, I was not worried about appearance, but was concerned that water would seep in, then freeze and expand the damage til the windshield needed repalcement. This is a bit of a pain, as once you cut the top of the bottle off you will probably do as I did and release some of the resin inadvertently.

place the sucker device close to where the hole is, then screw in the pa rt you use to apply the resin, so it just touches the screen and is in the middle, then push down on the suckers, after undoing a bit, look inside and it should be spot on. I had to try something and this worked very well, while the crack is still visible it is very hard to see. in diameter and cracks of up to 30cm in length in minutes, minimizing the appearance of these and stopping cracks from spreading. When you compare this next image below to the image above of the crack (before the repair) you can see that there is a significant improvement. While I think the resin has stopped the rock crack from spreading, the damage is still obviously vis ible.Buff off the Rain-X Fog treatment with a dry cloth or a paper towel - ensure you don’t drive until the windscreen is completely clear. This 5L ready-to-use rain repellent applies water-beading technology every time the windscreen was is used on your car, aiding in providing better visibility alongside cleaning your windscreen. So, lining this or that up, waiting X number of minutes, and all of the other things are extra to the process so I made my focus not only on following the directions but focusing on if the resin had penetrated the chip. As I have already stated it was as good as what Halfords done, which had since fallen out, and although not in my line of site, was put on my new MOT certificate, advising to get sorted as ASAP, which I have done. Rain-X Application is simple and easy - just ensure your windscreen is clean and dry before treating the exterior glass.