About this deal
although there's no need to it is a good idea to take the carrier off and give the shoulders where the pads sit a good clean, also give the sliders a good clean and regrease, you can feel the huge difference it makes.
RS PRO XZN M14 Spline Bit Socket, 1/2 in Drive, 100 mm
I was a bit hesitant as I didn't want to damage anything and didn't know which way it was supposed to go anyway. Upon reassembly I recommend fitting a new o-ring on the shaft, the outer seal can be cleaned and packed with silicone grease. Clean in hot soapy water and assess repairability, the pistons are PTFE coated so may not be rusted, check/clean caliper bore/seal groove. No I don't have access going in for the clutch problem to be fixed will ask the stealer if they can do it and just put a new bolt in.Push gently on the piston whilst rotating and you will feel the lug on handbrake mechanism locate onto its recess. The sockets are manufactured from chrome vanadium, providing a durable socket that can withstand extensive use in a range of working environments. All the manuals are available in this post in the sticky at the top of the forum which is better than nothing I guess. p>
Late or missing payments may have serious consequences for you and cause you serious money problems.
Torque on disk callipers? - Skoda Octavia Mk III (2013 - 2020 Torque on disk callipers? - Skoda Octavia Mk III (2013 - 2020
uk/" target="_blank" class="b-button__primary d-block mb-10 h-100 d-flex align-items-center justify-content-center">
Rear brake caliper disassembly FL MK2 - Skoda Octavia Mk II
Before doing any of the above, take a heavy hammer and a drift and give it some beans with the hammer, don't tickle it, do it like you are trying to kill it, often this shock is enough to 'crack the seal' so to speak, and then you will probably find it will undo with the spline tool.At 93000 miles, I had a feeling that these were original rear discs and that previously, only the pads had been replaced. Jack the veh up as high as you can get it safely and using axle stands, put the wheels under the car forextra protection. Should a Halfords Advanced hand tool fail while being used for the purpose and in the manner for which it was designed, it will be inspected and replaced. The veh needs to be high enough to allow the use of a 24" breaker bar together with a long helper tube, then brute force will do it.