Hammerite 5092820 Kurust, 250 ml , Blue

Product Information

By brush: apply directly to the rusty area, working well into heavily pitted areas, corners and edges. Using the brush in the cap apply directly onto the rusty area, working well into any pitted areas, corners and edges. Even on the bodywork a stone chip or scratch can soon grow into a nasty blister, and you need to treat rust properly to stop it spreading. We were dubious at first because the liquid was watery when applied and seemed to want to bead off the surface rather than soak in, but after 15 minutes our sample had turned dark blue and allowed us to apply another coat. I have now moved this sample outside so I can see if the rust comes back, or if the Kurust has killed it off for good.

Hammerite Kurust Review | The Bloke Cave Hammerite Kurust Review | The Bloke Cave

It still offers much better protection than most of the products we tested, and the coating seems tough. With DUALTECH it provides two-way protection by repelling water and stopping rust, keeping the metal stronger for longer. Dispose of contents and container in accordance with all local, regional, national or international regulations.I am a fully qualified, time-served, award-winning joiner with an NVQ Level 3 in Carpentry and Joinery as well as an HNC in Construction. We suggest starting with a small amount as you should not pour any unused Kurust back into the bottle.

Kurust Paint 250ml | RS 5092820 | Hammerite Kurust Paint 250ml | RS

If you are getting underneath a car, make sure you use axle stands or ramps and wear eye protection and a mask. If a spray isn’t suitable for the job, we’d recommend the Bilt-Hamber Hydrate-80 for tackling larger areas, and the Hammerite Kurust for smaller repairs.The fluid didn’t seem to penetrate and bond into the metal, appearing to film a skin over the top of the rust instead. Its protection performance was impressive too, with no corrosion visible on our painted surface, and just a few specks on the unfinished surface. One side of the steel sample was left unpainted while the other was sprayed with a single coat of primer and acrylic top coat, replicating a typical DIY repair. Unlike the waxy coating applied by the aerosol, this white fluid seemed very similar to many of the other products on test here, although its slightly thicker consistency made it easier to apply than some.