Joined in 2023 
82 
63 About this deal
But the PCH link to CPU are done with a DMI 2.0 that if i understand correctly use like a PCIe x4 2.0 bus (or something near) It’s an interesting decision – WD is expanding their low-power 3.5" hard drive offerings with a second line at the same time Seagate exists the "green" market, claiming low-power drives aren’t really all that beneficial or quite frankly, special. The Western Digital Red family of hard drives is designed for the 1 to 6 bay SOHO NAS space, which is about as specialized as it gets. WD has several features that they’re touting as critical for the NAS user including; NASware specialized firmware, Intellipower low power spindle, robust NAS compatibility list, three year warranty and a dedicated WD Red 24×7 customer support line (1-855-55-WDRED if you need them). Regarding https://en.wikipedia.org/wiki/Direct_Media_Interface this bus can achieve around 2 GB/s (in both side ?) NASware™ grows to 3.0 - Built off of our determination to deliver the best NAS experience, NASware 3.0 extends our promise by further optimizing WD Red for the NAS environment with added support for 6 to 8 NAS bays. WD Red now supports small NAS systems from 1 to 8 bays thanks to NASware 3.0, which further improves drive compatibility and reliability. At 48 TB of total capacity in an 8 bay system, WD Red expands your NAS experience.
On the other side, you have also 2 PCIe slots that use the PCH and if you use it, it's maybe the same.EE Store is a trading style of British Telecommunications Public Limited Company, which is authorised and regulated by the Financial Conduct Authority.
The Western Digital Red 3TB drive uses a primarily single-sided PCB, with all components facing the body of the drive for thermal dissipation. The board is held firmly to the drive with four Torx screws with a vibration isolation/thermal pad mounted between the circuit board and metal body. PS: Even with a 12 SSD pools it's hard to handle more than 2GB/s READ/WRITE throughtput within a ZFS Pool, so it can be enough for your pool. The first is our database profile, with a 67% read and 33% write workload mix primarily centered on 8K transfer sizes. if you are still going around in circles and need direct consultation, we have just started providing one-hour consultations via zoom. You can find out more about them via the link below: The easiest way to detect whether it is a SMR drive is the cache size. Old drives (WDx0EFRX) had 64MB cache whereas newWe also measured the power consumption of each Synology model filled with Western Digital Red hard drives through our Eaton Advanced Monitored ePDU, which monitors devices at the outlet level. The eight-bay Synology DS1812+ used 59 watts during active write activity and 55 watts at idle, while the five-bay DS1512+ used 49 watts under load and 44 watts at idle, while the small two-bay DS712+ needed just 31 watts under load and 24 watts at idle. For a long time there was an obsession with ashift=9 vs ashift=12 because of various reasons. This has an impact on a variety of things including space consumption and performance. Using ashift=9 on 4Kn is particularly bad for performance. Several different things have been done over the years to try to make this work correctly. I don't recall what the exact current strategy is, but I believe it tries to optimize correctly. With the increase in adoption of home and small business NAS units, WD’s decision to make a product exclusively for that growing market makes some sense. According to a recent IDC personal storage report, the personal and small business 1-12 bay NAS market is the fastest growing segment of the hard drive storage market. Additionally there’s a growing number of NAS systems shipped without drives pre-installed, which raises thequestion about which drive is best for NAS usage. Western Digital wantsRed to be the clear answer for small NAS units – no thought necessary, just buy your NAS enclosure and fill it with WD Reds.
Great Deal 
New Comment