DBX DriveRack PA2 Complete Loudspeaker Management System

Product Information

All-in-one toolboxes provide comprehensive digital audio processing, routing and tuning to manage... Feb 01, 2022 The new Dbx AFS2 updates and replaces the well–established and successful AFS224, which has been around for a few years now. As a user of the previous model myself I was interested to have a look at its replacement in the product line. Likewise I would liked to have seen better noise figures but I can’t say I have even noticed! Mine is totally silent as best I can tell. The compressor is a nice touch in this thing. So far I haven't needed it to make the PA louder, but I've used it a lot as a soft limiter with 2.4:1 ratio and the OverEasy setting around 4-6, just to keep peak volume in control when playing loud. Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)

Mahajak Development Co. Ltd., provide the venue with world-class HARMAN audio solutions for an un... Jan 14, 2022 One thing I liked was the fact you can make changes on the fly without any glitches, noises etc, so if you want to change eq mid show that's no problem.The setup wizard first asks if the unit is to be operated in linked mode, where the same settings and filters are applied to both channels, or as two completely independent processors (for example when used on bus or channel inserts), in which case you have to go through the wizard twice. Once that little formality is out of the way you can get on with the actual setup, which guides you through every step and is very easy to follow. I like this feature as I know of several potential users of this unit who would appreciate this level of hand–holding. dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW Services Guitar Workshop Electronic Repairs Workshop Music Store Events & Workshops Piano Showroom Music Lessons Recording Studio I had been considering the Behringer DCX2496 Ultradrive Pro, because of the third input, but very glad I chose the DBX PA2 instead.

Our rehearsal hall for my 21–piece band is a bit of a nightmare for live sound, especially with no audience in place, so I tried the AFS2 on our vocal mics and was very impressed with the results. I used one channel of the AFS2 on mono mains and the other on a single floor monitor just in front of the two singers, and not only was it possible to achieve much louder levels, but by pushing the volume during setup to force the system to ring out the worst frequencies, the whole sound became more pleasant, cleaner and less fatiguing. It’s good to know that not only have the essential filters been set and will remain set, but the AFS2 is ready to deal with anything that might crop up during rehearsal or performance. I have also used the PA2's RTA to set up separate EQs, eg. for monitors which are completely separate from the main PA. Just play pink noise through the system you're tuning and use the PA2's analyser to measure the frequency response, just like it used to be done before fancy AutoEQs. This method also works while setting up the crossover to make sure you have an even response around the crossover frequencies. PA2 has a noise generator for this purpose. Monday - Friday (Excludes Good Friday, Christmas Eve, Christmas Day, Boxing Day and All Public Holidays) control app for all 4 major OSes All you need to get the most from your PA. Now with complete control from your mobile device.Configuring which outputs are enabled can only be done through the Wizard, which takes away half of the handling stars. When setting up special setups you will need to think which wizard choices enable what you need and then set up the crossover manually. I'd prefer a possibility to just enable and configure each output freely instead. control app for all 4 major OSes All the processing needed to supercharge your sound system. Now with complete control from your mobile device. From a practical angle, the PA2 couldn't really be easier to use — there is no on/off switch, and when the unit powers up all the output channels are muted, though this can be altered in the utility menu. I crossed my fingers and cut power to the unit whilst it was still connected to my monitors, and there was no pop or noise of any kind — a big improvement over the original. This unit has a single stereo/mono input with three stereo outputs of which the LOW output can be configured mono for single subwoofer use. I suggest reading the manual to find out more about the features. (Yes, RTFM before buying!) Some special cases will need a bit more manual tinkering, eg. setting up a PA with three subwoofers. (Yes, one of the setups I did had a full-range stereo pair from HIGH outputs, stereo subwoofers from MID outputs, and a third mono subwoofer in the middle in front of the stage from the LOW output, and it was awesome!) Exhibo is set to take over distribution and services of HARMAN Professional’s JBL Professional, C... Oct 16, 2023

Digisynthetic DS24: considering the price of only ¤180 (in my country) and having all the crossover filters I needed (up to 48db/oct), it was looking really good! A 3-band PEQ at input and 5-band at output, a limiter, free routing for each output (A, B or SUM) - really all I needed. But then I tried the remote software... it was an epic horror. Buggy, with the graphs for crossover and EQ not working, limiter settings were completely invisible behind a graphics glitch - absolutely useless and out of the question. The rear panel houses all the analogue I/O (one stereo input plus three stereo outs), as well as the Ethernet port, which allows for remote control via an iPad when connected to a wireless router.The user manual has some useful information on setting up crossovers, and goes some way to explaining the audible difference between the two filter types. It's easy to set up the crossover filters manually, and what I like most about this function is the live LCD display, which shows the crossover curves changing as you adjust the parameters, which is a great way of understanding what is going on. The use of a crossover is rendered partly redundant by some self‑powered speaker systems (those that have their own high/low-pass filtering built in), but the ability to set different curves using the PA2 as an external processor can significantly improve system performance in some difficult venues. To The Limit I'm running my Venu360 via AES (main) outputs from the OktoDAC, so that should take the A-D part of it out of the equation.One of the Harman support techs told me the 360 was a fresh hardware design (same UI software, it would appear, though), but didn't ask 'from what' (presumably from the 260?) Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.

This cookie stores user-like settings for the chat system provider, which are required for our online chat service. Trusted Shops The goal was - 1.) get full crossover functionality with different filters available, 2.) have remote control capability through PC and 3.) spend no more than ¤400 for it. The praise band I'm in has fought with PA issues since day one. I bought this thing about 3 weeks ago and have been itching to try it with the band. Setup was straight forward -- I bought the RTA mic to go along with it. Updated Wizards make initial setup easywhile ensuring speaker tunings and other settings are up-to-date.dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW The PA2 has one limiter circuit for each output band (ie. it's post‑crossover), so it's possible to apply different settings to each band as dictated by the power amps and speakers. Applying post‑crossover limiting has the advantage that, as the different frequency bands are unlikely to reach the limiter threshold at the same time, part of the output signal will remain uncompressed by the limiter meaning that the sound won't all be squashed flat just because one band has reached the limiter threshold, so the gain reduction applied will tend to sound more natural and retain some of the programme dynamics. I was looking for an active crossover and ended up deciding to just go for a full loudspeaker management system!