Hasbro Gaming Toilet Trouble Flushdown Kids Game Water Spray Ages 4+

Product Information

Press the flush button on the top until it makes a flushing noise and both toilet seats are slightly raised at the same angle, and you are ready to GO. Place on the floor or level surface within easy reach of both players. Fill the bowls up with a little clean tap water, and you are ready to play!

If your valve has the slide-type float mechanism, the same task is accomplished by moving the stiff wire link upward using the adjusting clip. Although less common, a broken fill valve or a clogged vent system may be causing your weak flushing toilet. In those cases, you should consult with a plumber before attempting a do-it-yourself fix.Problem: You put an object in the tank to displace water and save money, but it’s affecting flush strength. Accidents will happen for a while, so when your child does use the potty or manages to stay dry, even if it's just for a short time, tell them how pleased you are. Refit the new chain that came with your new valve and adjust the length correctly so there is enough tension to easily pull the flap open but not to much as to subject it to unnecessary tension Remove the old flapper by disconnecting the the small prongs where it’s attached to the long tubular overflow valve and also disconnect the chain that’s attached to the flush handle

Before you can begin repairs, it's important to have a basic understanding of how your toilet tank works. If your drains are working just fine but your toilet is flushing sluggishly, then the toilet might be clogged with some debris that was flushed in the toilet. Use a plunger to unclog it. As a rule of thumb, avoid flushing anything that is not feces or tissue in the toilet.See a GP if you have difficulty controlling your bowels. Do not be embarrassed about talking to someone about it. Next, you will need to get a new Douglas valve assembly from your hardware store. Be sure the new assembly has an over-flow tube at least as tall as the old one.

One of the good things about the syphon valve is that you can simply replace the diaphragm when it splits or becomes damaged and the good news is they’re peanuts to buy, some as cheap and 30p! Sometimes, the flange bolts are loose and tightening them will help to keep the toilet stationed in one position. Tighten the bolts without making them too tight because they could also break the toilet thereby causing even more damage. Shimming the toilet under its base is another DIY solution to this problem. Examine the gaps and insert shims in between the floor and the toilet. Test and try different shim sizes and test at different locations until the shims fit perfectly. The toilet tank's function is to hold a quantity of water until you flush the toilet, at which time the water in the tank rushes down through an opening in the bottom of the tank and into the bowl, forcing waste out of the bowl and into the home's drain and sewer lines. There are two major toilet parts in the tank that make this possible: the flush valve and the fill valve.

Solution: Remove the object or try a smaller one to maintain flush power while saving water. Learn more about this solution. Stay positive and give your child gentle reminders about using the potty regularly. My child's about to start school and still isn't dry With the other type the push button is connected to the flush valve through a flexible cable. These are now the more common type of flush mechanism used on push button cisterns as they are much easier to install and connect up.