Gyeon Q2 CanCoat, 200 ml

Product Information

For example Cancoat is the most expensive and labor intensive way to coat a car over a set time period of 3 to 5 yrs compared to other using your term, traditional coatings, which for most long lasting durability being one of the primary reasons to coat a car. Applied can coat at the weekend . Full paint cleanse and machine polish . I used Bilt hamber paint cleanser. Not sure if I should have splashed out on Gyeon prep. Anyway I then applied can coat . left 2 hrs and applied second coat .

In situations where it's not practical or possible to leave the car for 24 hours before applying the coating (which is certainly the case when working outside), then a Prep wipe down becomes strictly necessary (otherwise the coating won't bond properly to still curing SiO2 components). And, as you guessed, this does reduce the benefits of using Primer in the first place (personally I would only ever choose to use Primer when working indoors). Thus, in your case it might be better to use Polish instead, and simply go Polish > Prep > CanCoat (assuming the paint needs minor refinement before the coating is applied - if not then just go with Prep > CanCoat).

GYEON Q² Can Coat EVO

Members and I of the detailing community cringe when we hear of any spray on product that has the name ‘ceramic’, ‘coat’, or ‘SI02 in it’. We have seen these (maintenance spray) products sold and detailing services with the application of these products offered with the blatantly misleading implication the consumer is getting comparable protection to a true ceramic coating.

Problems I noticed. It clogges the sprayer so I suggest you rinse the sprayer after every use and after every layering. Heat up some water (or use APC or paint prep product) and pour it in a cup or a plastic cup and use that to remove product from the sprayer head. This will help but some dry product may still be left behind to clogg the sprayer head. If you still have an older bottle of CanCoat, don't get rid of it. Use it as it is a great product. Once it is all used up then transition over to the Evo version. Gyeon Q² Can Coat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml size allows you to coat or re-apply it over 10 to 15 times! Waxes, sealants, coatings… oh my! The paint protection industry is evolving every single day. New technology is pushing out new products faster and faster, and consumers now have so many options it can be a bit overwhelming. Today we are going to talk about one of those options, Gyeon CanCoat. Outdoor Friendly. Meaning it can be applied outside but not in direct sun and avoid wet wet weather for the first 24 hours as it will affect the cure time (ie dew, rain). This will be a big hit for those that don't have access to a garage as it applies to all of the Gyeon coatings. One thing mentioned in the included maintenance book, is to apply Gyeon Cure as a precaution if planning to leave it outside.

Is it a Coating or a Sealant?

You should apply Gyeon Q² CanCoat EVO in a dry place out of direct sunlight. In all cases, prepare the surfaces you are going to treat in the normal way (wash > decontaminate > polish), and then do a wipe down with Gyeon Q²M Prep to ensure that they are spotlessly clean. For best results, spray Gyeon Q² CanCoat on to either the supplied microfibre towel or a PB Super Buffing Towel and immediately wipe it over a single panel to spread a thin, even film of product. Then refold the towel and continue buffing to fully remove the film and reveal an intense streak-free shine. Alternatively, mist a Meguiar's Even Coat Microfiber Applicator Pad with Gyeon Q² CanCoat EVO and wipe a thin, even film of product over a single panel at a time before buffing off with either the supplied microfibre towel or a PB Super Buffing Towel. Either way, you should aim to complete all of the buffing off within 1-2 minutes, i.e. before the coating begins to harden. Q² CanCoat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml allows you to coat or re-apply it over 10 to 15 times! I relation to beeding. I honestly don't think it's any better than wet coat. Maybe I need to apply cure on top........surely the rain would not have washed this off or reduced the hydrophic ability after 15-20 hrs? Gyeon Wet Coat is a “spray and rinse sealant”. You can apply the product according to the following instructions: Method 1

As a first foray into ceramic coatings, I thought I would try applying Gyeon Can Coat to my 6 year old car. Ensure your exterior surfaces are clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and we strongly suggest you wipe over with GYEON Prep to remove all traces of old wax, residue, polish or oils.The fundamental purpose of Primer is to improve the ease with which very soft paint finishes can be prepared for the coating application process. It does this by finishing down extremely well, and by doing away with the need for the subsequent wipe down with Prep. However, it only does the latter if the car is left for ~24 hours after the Primer is applied, which isn't usually an issue if you are working indoors. It still retains that versatility while making for an excellent choice for a maintenance topper a year down the road on a coating. It works with any coating.

Unlike yourself and applying with the towel which is easy enough, I just get better coverage with a microfiber applicator. It does not take any longer than using it with a towel. I also get less streaking with the microfiber applicator than I do with the towel.

GYEON UK

We are the UK distributors for GYEON Quartz, who are a formulator and manufacturer of advanced, quartz based protection and maintenance products.