Autoglym Polar Collection - Car Cleaning Kit Includes Polar Blast Pre-Wash Snow Foam, Polar Wash Car Shampoo, and Polar Seal Pressure Wash Coating

If you're looking for even more variety and an abundance of different flavours and scents for a similar cost, Chemical Guys offer some really good products, but you'll easily become overwhelmed by the options if you're not careful. READ NEXT: Polar Seal: Specially formulated pH neutral product for application through a pressure washer and a foam gun. Leaving a hydrophobic layer on your paintwork, water will then bead on the surface and reduce the time it takes to dry the car. Polar Seal can be applied to a clean, wet vehicle (avoiding the windscreen). Once coated, rinse off and dry to a high gloss finish. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.

Autoglym Polar Wash: Fuss-free cleaning

This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. Polar Wash is a safe and effective cleaner applied after using Polar Blast to remove excess dirt, traffic film and grime from your paintwork. Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products. Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions.

Ensure your car is still damp before applying Polar Seal and allowing it to dwell on the bodywork for up to three minutes before singing off. You should see an immediate hydrophobic layer of protection, evident with some truly gorgeous water beading. It's an incredibly easy way to get some extra protection, the only downside being that you can't apply Polar Seal to a windscreen, which means some careful trigger action.Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. Yes, apart from the front windscreen we would recommend Polar Seal can be used on all exterior surfaces. If the thought of adding a ceramic coating to your car scares you, or you want that deep shine traditional waxes offer, Autoglym has you covered. For the ultimate shine, our top choice is Autoglym Ultra High Definition Wax. It'll give your car a mirror-like finish thanks to the use of refined carnauba wax and comes with a handy applicator and buffing towel. Alternatively, there's Rapid Aqua Wax, a budget carnauba wax that can be applied to all exterior surfaces, including glass and rubber. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination. We would strongly recommend not using more than 40ml Polar Seal and 200ml water. Over use may cause white spotting and significantly compromise the effectiveness of Polar Seal. Using more product will not improve the depth of shine or increase its durability.