Hollowfibre Draught Excluder Cushion Pad Insert Inner - Rectangular Shape - 100% Polyester Filling - Double Stitched Edges - 20 x 92cm (8" x 36" inches) - Made by Riva Paoletti - Designed in the UK

Product Information

Turn the material inside out so you have a long cylinder that is open at both ends, with the prettier side of the fabric on the outside. Stitch together one of the ends - I did this with a row of stitches about 3cm in. You can fold the material over to stitch it. The bottom edges of front doors can be real hotspots (or should that be cold spots?) for draughts. For this reason, fitting brush strips or hinged flap draught excluders to this section of the door is highly recommended. The benefit of sewing your own draught excluder is that you can personalise the design by choosing fabrics of your choice and can make sure it’s the perfect fit for where you want to use it. You can even embellish it with some pretty hand embroidery or applique patches so that it ties in fully with the rest of your decor. Brush strips usually come in the form of a thin metal bar, with the brush fixed to the bottom. These bars can be cut to length and are normally screwed into place. Some are designed to slide onto the bottom of the door before being fastened with screws. You need to ensure that the bristles on the strip reach the floor. Stopping a draught is sometimes what you need more than turning the heating on, a simple draught stopper could save you money as well as stop cold air entering your home.

It takes a matter of minutes to make a plain draught excluder, and if you use interesting fabric it doesn't have to look boring. Or you can turn it into a ECOutletsnake, like the fab vintage ones above. What you need Thereafter, the movement of people around the house, moving in and out, and naturally opening and closing windows and doors will deal with other ventilation needs. In this step-by-step tutorial for how to make a draught excluder, we'll show you how to make a simple draught excluder using some left-over fabric from your other sewing projects. You don’t need to be able to sew or even have a sewing machine to make this simple draught excluder and if you’re new to sewing, it’s a perfect beginner’s project. Why making a draught excluder is easier than you may think

Table of contents

this initial burst of enthusiasm lead to him trying (and failing) to build a biogas digester to convert pig manure into fuel, at a Kent oast-house, his first conversion project.

The brilliance of homemade draught excluders is that you can make them as long or as short as you wish. If you have a patio door or large window with a draught you can make one to fit from a pair of old curtains. Perhaps you have sash windows? Thin draught excluders that are fitted across the sash prevent the wind whistling in. ok,so the boiler broke down on Christmas Eve, and we are consequently trying to make our very draughty house (which we have yet to renovate 6 years after buying... )a little more economocal until we can afford a new boiler in a month or two. There are also draught excluders made from the leg of old jeans, an old pair of tights or old woolly jumper sleeves. They can be stuffed with newspaper, rice, lentils, the pad from an old cushion, polystyrene foam, peanuts, bubble wrap or carrier bags – whatever you have at home. You can also make a laminate fabric one, too, which is easy to clean. Mark every draught source and visit your DIY shed, or go online, and look for suitable remedial products. Believe it or not, your problem will not be unique — every possible draught has been considered and appropriate products produced. Where to Buy Draught Proofing Supplies

Fitting a draught excluder with a brush strip

Draught excluders are an essential winter craft. Not only are they super useful for preventing cold air from coming in under your doors and windows, no one likes to be sat in a draught, but they are also key in helping to keep your heating bills down. A rectangular piece of material, at least 40cm wide and just longer than the width of the door (or you can chop a leg off an old pair of trousers and start at step five) I got a sewing machine for Christmas and am starting off with draught excluders. Lots of options for making them on t'internet - I was intending to make simple tube and stuff with old rags or kapok. Better suggestions seem: His interest in renewable energy and sustainability was first inspired by visits to the Royal Festival Hall heat pump and the Edmonton heat-from-waste projects. In 1979 Last weekend I discover my new home is about as well insulated as a beach hut. Everywhere I go there seems to be a draught. As it's a rental property, I have to get permission from my landlord to alter any of the fixtures, so I got out my sewing machine to make some draught excluders instead.

Another option is hinged flap draught excluders made from rubber. These are fitted in a similar way but feature a rubber wiper section. 3. Cover the keyhole

The verdict: Doorstops and draught excluders

Moving in 2002 to a small-holding in South Wales, providing as it did access to a wider range of natural resources, fanned his enthusiasm for sustainability. He went on to install renewable technology at the property, including biomass boiler and wind turbine. They didn't cost much because I used fabric discarded from some curtains I had altered, and they've allowed me to turn my heating down a notch. So at least I'm saving money (and doing my bit for the environment). In Australia, sand-filled draught excluders are called door snakes. All you need is a soft filling that is compact enough to prevent draughts and you can get started.