DEWALT Diamond Blade for Masonry (DW4712B), Silver, 7-Inch

Product Information

The quality of the diamond is important, as this will affect how well the blade cuts. A higher quality diamond will be harder and will stay sharper longer. However, they are also more expensive. If you’re like most people, you probably think that a masonry blade can only be used on a circular saw. However, this is not the case! You can actually use a masonry blade on any type of saw, including a hand-held circular saw. The unrequired part will come off either in pieces or in one go leaving you with the required part. You can now use that portion to fix it on the pavement or patio or wherever you need. Frequently Asked Questions Is Hiring Someone to Cut Stones a Better Idea?

One thing that you must consider here is the arbor. If you have different blades, particularly from different brands, especially if they don’t match the brand of your saw, then the hole in the center of the blade may not fit over the arbor. That said, if the blade does fit on the arbor, and you are able to tighten it securely, then there should be no problems on this front. Worm drives: these have their engines mounted behind rather than next to the blade, providing a clearer view for the operator, as well as more cutting power. They are ideal for longer, deeper cuts

Can You Use a Smaller Blade on Your Circular Saw?

I have discussed the deadly effects of cutting a stone dry. Naturally, the next step is to use water to prevent dust smoke. You can use water in two ways: Abrasive saws: these feature flat blades without teeth and are designed for use with tough materials like concrete and tiling Put on your personal protective equipment (PPE): a mask, visor and ear defenders are standard for circular saw use There is another method of removing the required portion. Place the stone on an overhanging surface or a table. Hit the stone (the portion that’s not required) with a hammer or a rubber mallet. Once you have placed the stone carefully, switch on the circular saw’s motor and run the motor on the marked area. Gradually insert the blade through the stone.

It would be best for you if you take protection to avoid any mishap. Generally, precautions include: There is also the simple fact that the larger the blade is, the more power is needed to drive it forwards. If the blade is too large, and the motor of the saw is not strong enough, the blade might not be able to spin fast enough. You’re going to have very limited cutting power due to this, and for this reason, a circular saw fitted with a larger blade might not be able to cut at all. Can You Use a Blade with Different Kerf on Your Circular Saw? Circular saws are highly versatile tools that will cut straight through most materials if used correctly. Here is a basic guide to circular saw use: In case you are wondering how and when to change a circular saw blade, read this article. Tagged Circular Saw Categories Like all power tools, circular saws can cause serious injury. Here are some of the most common hazards to watch out for:

Can You Use a Larger Blade on Your Circular Saw?

However, if you have a diamond blade or a carbide-tipped blade, then you will be able to cut through concrete. Just keep in mind that these blades will wear down much faster than steel blades when cutting through concrete. Can You Put Masonry Blade on Circular Saw? Pay close attention to cables and leads which may present a tripping hazard. Make sure none are dangling in areas you are likely to move into while operating the saw In addition to specialist models, UK tool vendors offer a variety of blades to optimise general purpose circular saws for different materials. If you will be working with one substance for a significant period, a specialist circular saw model might be the best choice. On the other hand, if adaptability is a higher priority, a different blade is probably more sensible (and cheaper). The next step in this process is to measure the exact area you need to pave or fix the stone. After measuring it, mark the stone with the measurements you need cut off with chalk or marker.

Mark the planned cut line along the target material using a tape measure, ruler or similar device. Make sure this is accurate to avoid waste. On darker materials, masking tape can also be used to mark the line of your cutAs you can see, it may very well be possible to use a smaller blade on your circular saw, particularly if you need maximum RPMs and speed. As long as the arbor hole is the same size, a smaller blade will do just fine. However, this does not really apply in the other direction. Using a larger blade with a circular saw that is not intended to hold a blade of this size is really never a good idea. It may break the saw or cause injury to the user. You will also need some personal protective equipment, two sets, because you will need an assistant. Your assistant’s job will be to stand in for a key element in any circular saw: the water pump.