Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Water Treatment (Includes Chlorine, pH Minus, pH Plus, Foam Remover and Test Strips)

Product Information

Test your water regularly after starting up the tub and see how the levels are sitting. If the hot tub chemicals do not meet the demand, add more or reduce the chlorine level according to your needs. Along with filter changes swimming pool and hot tub, chemicals are an essential part of your spa maintenance and help ensure you enjoy hot tub benefits as well. You need something like Bromine or Chlorine that kills bacteria and keeps the water balanced otherwise you will end up with issues. Even if you’re buying cheap Chlorine or chemicals, they are going to be far less expensive than hiring a hot tub maintenance service to come out and do it for you. Organic Options This hot tub care guide for dummiesis also a great starting place. Hopefully, this guide will enable you to keep the costs down whilst still maintaining a hot tub’s benefits. Chlorine is the most significant element of a spa chemical starter kit. It is usually used in households as bleach. Along with Bromine, consider it as the most effective sanitiser for your hot tub. Apply Chlorine to your hot tub to kill bacteria and keep the water safe and clean. Consider using clearwater hot tub chemical starter kits to increase the pH level. In that case, using pH plus comes in handy. Add two teaspoons per 1000 gallon water. Use a jug to dissolve warm water and distribute evenly throughout the tub water. Leave for a minimum of 2 hours and then retest the water to ensure that the pH level is between 7.2-7.6. Add more if needed.

The award-winning Clearwater® Hot Tub Chemical Starter Kit is a fantastic option for new inflatable hot tub owners and is an easy-to-understand introduction to the world of water treatment. Run the pool pump for at least an hour before testing to get an accurate reading. Dip a single test strip into six inches of water. Shake the excess water off while removing it from the pool. Some wonder if they are putting the right amount of chemicals in the water or not. It depends on the hot tub’s size. Also, 5 to 8 parts per million are what you should aim for. Parts per million (ppm) is how chlorine is measured in. On average, chlorine levels should be between 1.5 and 3.0 ppm. 2. pH Minus pH minus is used to decrease the pH level of the water. The pH minus is an effective way to keep your hot tub’s pH levels lower, reducing the alkalinity and producing a more relaxing bathing experience. It’s the best way to avoid itchy skin or stingy eyes.

Frequently asked questions about hot tub starter kits

Clearwater® chemicals are designed for and tested on Lay-Z-Spa hot tubs but can be used on any and all home hot tubs. Chemical water treatment for hot tubs is essential regardless of how long or how often you plan to use the hot tub and this starter kit has everything you need to get started and keep up the water maintenance. Suppose your hot tub or spa sees daily use. In that case, you’ll know just how difficult it can be to keep your pH levels balanced, especially with the constant changes the water experiences due to the body oils, lotions and any other contaminants that your guests leave behind. Do not get me wrong; overexposure to Chlorinated water is not healthy. It is just that some people do not feel bad about the Chlorine smell in their hot tub water. There is no single best way to find the perfect product for you be it a PH increaser or either Chlorine or Bromine. It is a time taking process and ultimately happens over time. Make sure that the water temperature is 20-degrees. Add two teaspoons of chlorine per 200 gallons of water. Let the chlorine dissolve in the water. Using the pH minus is very easy. Once chlorine is added to the water, the pH level is tested through the test strips, and if the pH level is high, pH minus is applied to the water to balance the level.

Each treatment available on the market is different; From Bromine or Chlorine tablets and granules to chemicals for salt systems. Most of them work as advertised to kill bacteria, but unless we have used them, we cannot say if they are the best choice for a hot tub owner. One thing for sure is you shouldn’t use a hot tub without chemicals The hot tub chemical starter kit for clearwater is all you need to ensure that your water is safe and relaxing. This starter kit has won many awards and helps prepare your hot tub with clear and healthy water. pH balancers: The pH level of your hot tub water is important for both the effectiveness of the chlorine and the comfort of the users. The ideal pH level is between 7.2 and 7.6. You can use pH balancers, such as pH Plus and pH Minus, to adjust the pH level.You need to test your pool water at least once a week. If there is heavy rainfall or many people use the pool, you’ll need to test the water more often. First, test the pH and alkalinity level of the water. If one of these levels are imbalanced, you need to use the foam remover. Shake the bottle before using the foam remover. For some who get used to swimming at an early age in swimming pools, the smell of Chlorine becomes natural, and for others, it always remains a problem. To keep your spa water clean with the perfect balance, you need to have knowledge about different spa chemicals and do regular spa water testing to ensure the balance is safe for you to soak in.

In most cases, getting a hot tub is just the start of a long, complex and continuous learning process on how to maintainthe hot tub so that it keeps providing you with an excellent and worthwhile experience. It is easy to apply, and the instructions on the kit are simple and easy to follow. The kit includes: 1. Chlorine This Kit contains all the chemicals required to set up and run your system safely. Ideal for a hot tub novice who feels daunted by the chemical requirements, these kits are designed to make your introduction to the world of hot-tubbing as painless and simple as possible.

You may also like

Finally, use the foam remover to manage or prevent excess foam from the water. The test strips will help you balance the water levels and ensure the tub water is safe and hygienic. Coming up are our favourite chemicals for spas, but for now, see why you need to keep hot tubs in pristine condition… Add Wave Spa No Foam at a rate of 50mls per 450 liters of water. Add whilst the filtration system is running and allow to run on for at least 1 hour. Use 25mls per week or as a defoamer as required. Add 50ml of foam remover directly to the tub water. Please ensure that the ventilation system is running while you’re applying the foam remover. It will help distribute the formula within the spa water. 5. Dip Test Strips You should do a few things before filling your hot tub with fresh water like adding various chemicals to balance your water and make it safe to bathe in. Also, it keeps your spa equipment safe because poorly balanced water leads to damage, scale and corrosion.

Using a PH decreaser or increaser will result in a ph level that is optimum for both the pool’s hardware and prevents skin irritation This pool chemical starter kit is the safest means of sanitising your hot tub without worrying about putting the excess in your pool. There are two ways you can put chlorine in the hot tub: Hot tub chemicals might sound complicated. But, in reality, getting the chemical balance right in your hot tub, and then maintaining it, really isn't as daunting a task as many assume. If this is all new to you, our Lay-Z-Spa Chemical Maintenance Guide is the perfect place to get started after you've finished reading this article. Remember total alkalinity can also affect your PH level so you may need to increase and decrease that too. However, the bottom line is that maintaininga hot tub is not a cheap activity. It is a constant expense and something that you should really know about.

Increasing the life of hot tub parts and ensuring that filters for hot tubs can last as long as possible. If you bathe regularly in your hot tub, you’ve undoubtedly noticed the foam building up in the water. No matter how much of a neat-freak you are, the foam will form in the water because you’re using it. Dissolved solids create foam in the hot tub water. The Jacuzzi chemicals mentioned above are all great products in one way or the other. Even if they feel expensive to use, the ideal chemicals will help increase the life of your spa and ultimately provide excellent value for money. There is nothing that can be compared with a perfect relaxing soak and that is one of the reasons you got the hot tub in the first place.