T55 x 55mm 1/2" Drive Torx Star Socket Male T-Star Cr-V Steel AU638

Product Information

Torx is an innovative fastener system designed to overcome the shortcomings of traditional screw fasteners. A key advantage of the Torx system is that is allows higher torque transmission than other drive systems enabling fastenings to be tighter and therefore more secure.

As previously noted - the original Torx drive system was developed by Camcar Textron in 1967. But this early specification has undergone some beneficial development and improvement highlighted in this post. Drive System Issues in Production Like all other fasteners, even Torx screws are available in different sizes. They follow a special ‘T’ sizing for the internal Torx an ‘E’ sizing for the external Torx. The size of the screwdriver or the drive bit must match with the size of the Torx screw. The Torx Plus, also known as the Internal Plus, is an improved version of the original design. This version is designed to provide better torque transfer than the original design. The lobes on the screw allow for increased torque without causing much wear on the tool. Having a good understanding of the difference between an External Torx and an Inverted Torx will ensure that you get the right bit for your project. Both types of screws have similar characteristics, but you'll want to use the type that best matches your needs.

Back in stock alert

Torx Plus offers a range of advantages over the Torx tool, which is already far better than other fasteners on the market. As illustrated in the figure below, the Torx design has a 15° drive angle, while the Torx Plus features a 0° drive angle. The decreased drive angle allows for less movement of the fastener relative to the head. It eliminates radial stresses at the impact points between the head and the fastener. The most common sizes of a Torx screw are T10, T15, and T25. There are also specialized Torx sizes, including T47, T55, T60, and T65. These are used in certain circumstances, but they are not as common as the T10, T15, and T25. The Torx Ttap is perfect for applications that require secure fastening in confined spaces. Since installing the Torx Ttap fasteners can be done with one hand, you don’t need to squeeze both hands into a small space for the installation.

Thus, while Torx offers tremendous advantages over traditional fasteners hex, the Torx Plus is a better option for assemblies that need a tighter grip. Advantages of Torx Plus Whether you are buying a new set of Torx tools or replacing a broken one, you will need to make sure you buy the right size. There are three standard sizes of Torx, and each one can be distinguished by the T before a number. In addition to these, there are also specialized sizes that are designed for specific uses. You can browse the chart below to find the right tool for your project.Another advantage is that the Ttap drive doesn’t wobble since the geometry stabilizes the drive. Torx Ttap vs. Torx screws Here, the traditional Torx fastener head has an additional recess in the center, perfectly matching a special pin. This pin holds the fastener in place without the need for a magnetic fastener bit, eliminating metal splinters that clog the tool drive. The Ttap also eliminates cam-out since the drive fits the head perfectly, and the geometry ensures that you don’t have to apply pressure to install the fastener. Examples include vehicles, motorcycles, computer systems, bicycles, consumer electronics, and hard disc drives. Tamper Proof Torx What is Tamper Proof Torx? The modified geometry improves durability and maximizes the torque available to the fastener. This increased torque allows the fastener to be fastened more securely without stripping the screw head. Sidewall Difference

The standard Torx driver bit or the key will work on the Torx Plus, but it’s not a perfect fit and can lead to wear or damage.

Halfords Advanced Star Bit TX55 1/2" Socket

Some versions of the Polydrive systems have more lobes in the fastener heads, although this isn’t common. Torx vs. Polydrive (RIBE) Screws The metric system is more widely used in other countries. In the United States, the Imperial system is still used. It is based on the Roman Empire's system, which considered one foot to be the length of a human being. This means that the same tool in metric units won't fit an Imperial nut. Torx bits are a specialized type of screwdriver bit designed to prevent slips. They’re a standard 1” length and have a flattened, six-pointed head. For this last reason, they’re generally known as star bits. Benefits