Roughneck ROU22132 Screwdriver - Phillips PH2x125mm

Product Information

Not very) fun fact: DIN stands for “Deutsches Institut fur Normung” (German Institute for Standardization). Much like Phillips screwdrivers, Robertson drives use a numbering system. What sets these apart, however, is that all sizes are also color-coded for easy reference. Robertson Sizes Chart Color Code

The JIS B 1012 [29] was commonly found in Japanese made equipment, such as cameras and motorbikes. Superficially it looks like a Phillips screw with narrower and more vertical slots, to give less tendency to cam out. The bottom of the recess is flat, and the point of the driver has to be blunt. A Phillips screwdriver has the same 26.5 degree cone angle but because of the tapered slots will not seat fully, and will damage the screw if forced. United States Maritime Service Institute. (1949). Engine Room Tools. New York: Mast Magazine Association. p. 25 Lox: Screws Designed for Power Tools". www.lox.com. Archived from the original on 2017-12-09 . Retrieved 2017-12-24. A Phillips screw head is slightly different from a PoziDriv; [10] see §Pozidriv section below for details.Note the small lines on the Pozidriv screws between the large cross-flats – that’s how they are easily recognized Starting with a bit of history. Just as little as necessary to understand the current chaos with cross-head screwdrivers. Don’t be afraid – it won’t hurt. 🙂 I tried consulting local Unior representatives (mechanical engineers) and they were clueless about this problem. I also consulted with a company that sells tools of several different brands to other companies – mechanical engineers there didn’t know the answers. Apart from that, I didn’t find any other tool brand representatives willing to talk in my city or country.

Hi-Torque slot drives were designed by Alcoa Fastening Systems, for situations where very high torque is needed, along with the ability to repeatedly install and remove the fastener. [7] The design features curved walls, unlike the straight-walled slot drive. Fastener Superstore Fastener Guide". Archived from the original on 2017-12-29 . Retrieved 2017-12-28. Fortunately, I don’t get to choose how our educational system is set up. One worry (tough choice) less. 🙂 McMaster-Carr catalog (116thed.). p.2821. Archived from the original on 2019-12-14 . Retrieved 2011-09-26. Needs login The Phillips/square screw drive, also known as the Quadrex, Pozisquare screw drive, is a combination of the Phillips and Robertson screw drives. While a standard Phillips or Robertson tool can be used, there is also a dedicated tool for it that increases the surface area between the tool and the fastener so it can handle more torque. [62] Recex [ edit ]

The rest of this post is a rather detailed explanation of the crossed-head screwdriver topic, but with no final answer for now, just a few practical examples.