Crucial MX500 2TB 3D NAND SATA 2.5 Inch Internal SSD - Up to 560MB/s - CT2000MX500SSD1

Product Information

Power-to-performance comparison measured internally between Crucial P5 Plus and T500 PCIe® 4.0 NVMe SSDs. Your performance may vary. Non-heatsink versions of the Crucial T700 must be installed with a motherboard or alternate heatsink to achieve optimal performance. Compared to Gen4 SSD performance without DirectStorage, based on Micron test results with supported GPU that uses GPU decompression.

Typical I/O performance numbers as measured using CrystalDiskMark® with a queue depth of128 and write cache enabled. Fresh out-of-box (FOB) state is assumed. For performance measurement purposes, the SSD may be restored to FOB state using the secure erase command. System variations will affect measured results. When installed in a Gen3 system, typical read/write speeds are 3300/2700MB/s.

Typical I/O performance as measured using CrystalDiskMark® with a queue depth of 512 and write cache enabled. Windows 11 Core isolation disabled for performance measurement. Fresh out-of-box (FOB) state is assumed. For performance measurement purposes, the SSD may be restored to FOB state using the secure erase command. System variations will affect measured results. SATA: This refers to both the connection type and the transfer protocol, which is used to connect most 2.5-inch and 3.5-inch hard drives and SSDs to your PC. SATA III speeds can hit roughly 600MBps, and most—but not all—modern drives max it out. (More on that in the next section.)

MB/s speed measured by Crucial as maximum sequential performance of device on a high-performance desktop computer with Crystal Disk Mark (version 8.0.4 for x64). Your performance may vary Compatibility may vary and may be contingent on device formatting and host capabilities. Compatible Android devices must be able to work with USB Mass Storage over OTG. Operating system updates and reformatting may be required.Gaming speed claims based on Micron test results measuring Forspoken Benchmark, Call of Duty® and Valorant® bootup times of the Crucial T500 and other Gen4 SSDs. Your performance may vary. While the Seagate Game Drive is optimized for a PS5, it’s no slouch as a regular SSD either. In our speed tests it did remarkably well, earning the spot as the second-fastest PCIe 4.0 SSD with random ops that we’ve ever tested. Seagate also provides a generous five-year warranty with the drive and it has an astounding 1,275TBW rating—more than double the industry norm. The drive is a bit pricey, but the special optimizations for PS5 means that console owners can rest easy knowing that their money is going to good use with the Seagate Game Drive. The biggest thing to watch out for is the technology used to connect the SSD to your PC. We go into deeper details and buying advice in our guide on which type of SSD you should buy.

Typical I/O performance numbers as measured using IOMeter® with a queue depth of 32 and write cache enabled. Fresh out-of-the-box (FOB) state is assumed. For performance measurement purposes, the SSD may be restored to FOB state using the secure erase command. System variations will affect measured results. Under typical conditions for airflow and ambient temperature, our pre-installed premium heatsink allows the T700 Gen5 SSD to run at max workload without the need to thermal throttle. Please ensure your drive has proper airflow for maximum performance.MB/s speed measured as maximum sequential performance of device as measured by Crucial on a high-performance desktop computer with Crystal Disk Mark (version 6.0.2 for x64). Your performance may vary. Comparative speed claims measured as maximum sequential performance of similarly situated portable SSDs, mainstream portable HDDs and mainstream USB flash drives from vertically-integrated manufacturers selling under their own brands as of June 2019. Some storage capacity is used for formatting and other purposes and is not available for data storage. 1GB equals 1 billion bytes. See https://www.playstation.com/en-us/support/hardware/ps5-install-m2-ssd/ for specs and installation instructions. The Seagate Game Drive PCIe 4.0 NVMe SSD was made specifically for next-gen consoles—the PS5 in particular. And it doesn’t disappoint. Instead of HMB, it features DRAM for primary caching duties, which is practically essential for Sony’s console system. This is important because the PS5 doesn’t support HMB, so a drive such as this with DRAM cache is a must. The drive comes in 1TB and 2TB models, which means you’ll have plenty of space to store all of your games should you need it.

Capacity and price are important, of course, and a long warranty can alleviate fears of premature data death. Most SSD manufacturers offer a three-year warranty, and some nicer models are guaranteed for five years. But unlike the olden days of SSDs, modern drives won’t wear out with normal consumer usage, as Tech Report tested and proved years ago with a grueling endurance test. Speed matters, of course, but as we said most modern SSDs saturate the SATA III interface. Not all of them, though. SSDs vs. hard drivesJP” is attached at the end of the parts number of official Japanese distributed products shipped after April 2017. Faster performance with content creation apps based on internal test results measuring SPECwpc benchmark scores comparing the Crucial T500 to other Gen4 SSDs. Your performance may vary. The PCIe 3 tests utilized Windows 10 64-bit running on a Core i7-5820K/Asus X99 Deluxe system with four 16GB Kingston 2666MHz DDR4 modules, a Zotac (Nvidia) GT 710 1GB x2 PCIe graphics card, and an Asmedia ASM2142 USB 3.1 card. It also contains a Gigabyte GC-Alpine Thunderbolt 3 card, and Softperfect Ramdisk 3.4.6 for the 48GB read and write tests.