Joined in 2023 
82 
63 About this deal
If your audio source is not equipped with a USB port, the Marmitek BoomBoom 50 Bluetooth transmitter can also be powered by an external USB power charger (5V, 500mA, not included) thanks to the included USB extension cable. Once the pairing is successful, the device will indicate that it has connected to the RCA projector. You should now be able to stream audio wirelessly from your device to the projector. There are several Bluetooth adapters to choose from. The important thing to consider is that the one we choose has analog inputs and support the aptX Bluetooth protocol for the highest quality sound. Best TV mounts | Best Bluetooth speakers | Best Soundbars | Best TV antennas | Best cheap TV antennas
There are a number of reasons you might want to hook up your speakers for Bluetooth. Enabling Bluetooth allows you to stream audio from any Bluetooth capable device. This means you can watch videos on your laptop with your speaker, or you can play DJ on your phone. Get a Bluetooth Receiver One thing to be aware of is that there are wireless speakers that use other protocols than Bluetooth. Since the left and right channels of a stereo aux cable share a ground, you will need to split the ground. Get two lengths of small gauge wire and attach them to the ground wire and solder the three wires at a single point. They're like traditional true wireless earbuds, but the audio settings and listening experience can be customized with the TV Clear companion app, and the transmitter’s low latency streaming technology keeps audio and video in sync so there’s no delay in the audio.
If you find that your RCA projector does not have Bluetooth capability, don’t worry! You can still connect it to Bluetooth by using a Bluetooth adapter. A Bluetooth adapter is a small device that allows non-Bluetooth devices to connect wirelessly. It plugs into the audio output of your RCA projector and enables you to pair it with Bluetooth-enabled devices such as speakers, smartphones, or tablets.
Alternatively, if you want to add a Bluetooth audio channel to your powered speaker system, you will want to hook your speakers up to a preamp’s output channel, and plug the Bluetooth into one of the audio input channels of the preamp and use the other channels for your other audio devices. With the audio playing, verify that the sound is coming through the Bluetooth-enabled RCA projector. You should now be able to hear the audio wirelessly without the need for any physical connections. By connecting the Bluetooth adapter to your RCA projector, you have taken a significant step towards enjoying a wireless audio experience. In the next step, we will discuss how to turn on Bluetooth and pair your projector with your desired devices.A final speaker connection you may encounter is a banana plug. Like with speaker clips, banana plugs have designated positive and negative plugs. Whereas most connections combine positive and negative connections into one plug, banana plugs have separate plugs for positive and negative. Thus, if you find an RCA to banana plug connection, it will have one RCA plug per every two banana plugs. When you’re shopping for a Bluetooth TV adapter, you want to make sure it can connect to your TV (or computer, if that’s your video source). Most TVs today will have a 3.5mm auxiliary output. Some come with an optical digital audio output or an RCA (stereo) output. A preamp is also a good way to add volume control to powered speakers that don’t have one. If your powered speakers do not have their own volume control, it is highly recommended that you get a preamp. Otherwise, your Bluetooth device will be the volume control, and you will need to remember to set it to the appropriate volume before you listen every time. Connecting Bluetooth Receiver to Passive Speakers Codec Selection: If your device supports it, you may have the option to choose different Bluetooth audio codecs. Experiment with different codecs to find the one that offers the best audio quality and stability.
Great Deal 
New Comment