Flood/PPG FLD6 Floetrol Additive (1, 1 Gallon)

Product Information

Floetrol, made by Flood, is a paint conditioner, often used with water-based paints, such as semi-gloss latex, flat, acrylic, vinyl, and enamel paints. prevents the negative impact of the environmental factors (hot and cold temperatures or high humidity) Prepare surface as per instructions on your paint/finish can. As part of this please ensure that you have removed all loose and flaking material. You should also treat any organic growth (mould etc.) with a fungicidal solution or a mix of 1 part water to 1 part chlorine bleach (allow the bleach solution to sit for 15 minutes), rinse thoroughly and allow to dry. Application

If you’re looking to test your acrylic pouring skills but not quite sure where to start, you’ve come to the right place. We’re going to review all the pouring mediums available for your use to help you dive into the world of acrylic pouring. What Is Floetrol? Floetrol is a cheap and easy way to make your pouring medium. It has many other advantages that I covered above. There are other options that are just as cheap, if not cheaper, than using Floetrol, but those are usually household products and not specifically paint pouring mediums. We’ll explore these other options below. Alternatives For FloetrolIn acrylic pouring, that same principle of thinning the paint is applied. When the paint is thinner, it naturally gives way by opening little circles, or cells, to show paint layers underneath. But, to get the best results, you should always use a top-quality brush. One issue many people have when spraying paint is a build-up of paint. Elmer’s Glue will also dry to a matte finish, which may have a dulling effect on your paint colors. 6. Mod Podge How much floetrol to add to acrylic paint? An excellent way is to follow official instructions and mix 1 part of Floetrol to 2 parts of acrylic paint. The best ratio for your needs depends on the paint you use, the paint consistency you want, and your experience. There are also some recipes with silicone and water.

If there are other chemicals mixed in with the silicone, it may not produce the same results and you’ll be left with a disappointing painting. 2. Liquitex Floetrol should not be used to thin paints, contrary to popular belief. It is best when applied to a semi-gloss, flat, or eggshell sheen. If you’ve used an acrylic pouring medium made by an art supply company before, then you’ll notice a difference with Elmer’s Glue right away. Even though Floetrol works great with acrylic paints, keep in mind that it has not been tested for art archivability over time. Oldfields - UK Exclusive Angled Cut Paint Brushes Straight Cut Paint Brushes Brush Bundles & Sets Sash Brushes & Fitch's Value Brush Sets Bristle Paint Brushes

Will using higher ratios of Floetrol than those recommended for house paints have any negative or long-lasting effects? (for example, mixing 50:50 acrylic paint to Floetrol, 1 part Acrylic paint to 3 parts Floetrol or 1 part Acrylic paint to 4 parts Floetrol)

As I said it was not made for pouring. There is a range of pouring mediums and acrylic liquid substitutes that were designed by manufacturers specifically for pouring and fluid art. Therefore, the paints are then easier to use, rather than being too heavy and less forgiving when sprayed onto surfaces.

When Floetrol is added to paint, it thins the paint by enhancing the water aspect of water-based paints to make it smoother. This thin, smooth texture is what makes it easy to work with. Floetrol is a water-based paint conditioner that helps improve paint flow and workability of paint. Floetrol makes interior and exterior emulsion and acrylic paints (including coloured wood stains) work more like oil-based paints. Not only that but, it also allows the paint to adjust to more difficult conditions such as hot, cold and humid environments.Broad / Taping Knives Filling Knife & Scraper Sets Toupret Range Caulkers & Tools Caulking & Sealant Guns Skimming Blades Flexi Tubs However, many artists have recently started to use Floetrol as a pouring medium in paint pouring as it greatly improves the flow and leveling of acrylic paints. It is a hardware-store alternative to more expensive brands like Liquitex, Golden, etc. Do you need Floetrol for acrylic pouring? Floetrol is a paint conditioner and extender that is used with latex-based house paints. It is mainly used to prevent roller and brush marks. Stir your paint thoroughly and begin to apply in the normal manner. If paint the pulls, sets too fast, does not level or flow properly, add Floetrol until the paint spreads smoothly, easily and provides sufficient ‘wet-edge’. Allow the brush, roller or sprayer to be your guide. Considered to be a secret weapon by many painters, Floetrol provides latex paint with a similar leveling and flow to oil-based paints.

Alternatives to make lots of cells at low-cost: household products with silicone, torching the pour, oil additives, some even use Minwax wood conditioner! No. Floetrol will not chalk or flake but it cannot stop the paint from doing that. Is there anything that should not be mixed with Floetrol? It will not have any negative or long-lasting effects. However, you may find that adding more than the recommended values that the paint may start to become opaque. Whether this is a negative or not I guess is determined by what the artist wishes to achieve. Is there a shelf life to Floetrol? the amount of Floetrol added will not change the colour of matt or semi-gloss emulsion or acrylic paints. Floetrol may reduce the sheen in gloss paints.Axus Decor Colron Dunlop Pro Decor Geocel Hyde Mirka Osmo Paint Warrior Red Devil RollingDog Semin Tajima Sealants & Caulk Ready Mixed Filler Powdered Filler Repair Care Wood Fillers 2 Part Fillers Grab Adhesive Filling Knives & Scrapers Acrylic pouring is an art form that’s open to many different styles and expressions based on the colors you use, the additive you use, and the effect you create: cells, waves, marble, and more. Also, high humidity can prolong the drying and re-coating time. When used on bare metal, though, it should dry within a day. Overall Coverage