Blackmagic Design BM-BDLKDVQDHDMI4K Internal PCIe Video Capturing Device

Product Information

SMPTE259M, SMPTE274M, SMPTE292M, SMPTE296M, SMPTE372M, SMPTE424M, SMPTE425M, SMPTE2036‑1, SMPTE2048‑1, SMPTE2081‑10, SMPTE2081‑11, SMPTE2081‑12, SMPTE2082‑10, SMPTE2082‑11, SMPTE2082‑12 andSMPTEST2108‑1 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI, 4Kp95.90 DCI, 4Kp96 DCI, 4Kp100 DCI, 4Kp119.88 DCI, 4Kp120 DCI

PCIe capture card with 4 HDMI inputs for capturing up to 4 different SD, HD, Ultra HD and 4K formats at the same time HDMI and SDI video connections are switchable between SD/HD/2K and 4K. Component analog video connections are switchable between SD and HD. Copy Protection Channels unbalanced. Analog outputs 3 and 4 can switch to AES/EBU outputs for audio 3 & 4 and 5 & 6 output. This provides a total of 6 AES/EBU output audio channels when using this feature. SDI Audio InputsHDMI 2.0a supports Deep Color and HDR. Automatically configures to connected display. HDMI Resolution I should say that I have very limited knowledge of OS Monterrey and most of the above points of interest I've gleaned from forums, so excuse me if I'm mentioning redundant or irrelevant points.

The outcome of all of the above is that I cannot get Desktop Video to detect the Ultrastudio Express when launched. It displays the following message... This behavior is echoed by the command line updaters that I came across. Running the firmware updater (on all four devices in turn):My 'system report' identifies the UltraStudio in the Thuderbolt/USB4 port and provides the below detail... SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 425M, SMPTE 435, SMPTE 2081, SMPTE 2082, SMPTE 2082-10, SMPTE 2108-1, ITU-R BT.656 and ITU‑R BT.601. SDI Metadata Support The ultra studio will enable a grading monitor being used in apps like resolve and others which support the US3G et al. You will not be able to use that monitor as an ordinary monitor in macOS though.

DCI, 8Kp24 DCI, 8Kp25 DCI, 8Kp29.97 DCI, 8Kp30 DCI, 8Kp47.95 DCI, 8Kp48 DCI, 8Kp50 DCI, 8Kp59.94 DCI, 8Kp60 DCI 3D SDI Video Standards and of course, that shows the kernel module is loaded, but for completeness I can also see that directly: DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI, 4Kp95.90 DCI, 4Kp96 DCI, 4Kp100 DCI, 4Kp119.88 DCI, 4Kp120 DCI 8K Video StandardsDCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI*, 4Kp48 DCI*, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI , 2Kp59.94 DCI, 2Kp60 DCI, 2Kp95.90 DCI, 2Kp96 DCI, 2Kp100 DCI, 2Kp119.88 DCI, 2Kp120 DCI HDMI 2.0b supports Deep Color and HDR. Automatically configures to connected display. Multiple Rate Support The last piece of oddity is that every time I boot this machine, it now prompts me with a graphical box to update the software. I say yes, it spends a few minutes showing a progress bar, says it's complete, and I should shut down, which I do, and then it prompts me all over again.

Eventuell ist die Warnung bzgl. der Firmware-Version kritisch. Ein weiterer Hinweis, dass es sich hier um B-Ware handeln könnte. Vielleicht hat da jemand etwas geflashed (es gab zu dem Zeitpunkt eine aktuellere Beta-Software, aber nur für Mac). Jedenfalls habe ich die Karte nicht zum Laufen bekommen. Versuche, auf die Videoquellen zuzugreifen schlugen fehl, OBS blieb im Startvorgang hängen und hat sich irgendwann mit einem Segmentation Fault verabschiedet.

Compatible operating systems: Mac Mojave 10.14, Mac Catalina 10.15 or higher / Windows 8.1 and 10, both 64 bit / Linux bit RGB 4:4:4 in all modes up to 4Kp30 DCI and 8, 10-bit YUV 4:2:2 and 4:2:0 in all modes. 8‑bit RGB 4:4:4 in all DVImodes. It’s basically a dedicated data stream fed into the ultra studio and displayed on the grading monitor.