ARISTO Rod Compass for Circles up to 1280mm Diameter with Accessories AH59000

Product Information

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Works great! Infinitely adjustable within its range and very easy to make and use. It’s already a valuable addition to the shop and I expect it’ll be used often, assuming I can find it. I’ll probably paint the beam a bright colour, yellow, for example, to make it more visible. The last commonly seen instrument is always referred to as a set of trammel points. These were made by all quality instrument makers and were commonly sold separately from the beams. They are in many senses the best design,probably the most accurate to set, and easiest to use for radii over about 300 mm / 1 foot. These are certainly the prettiest of the designs. They do required finding a beam. That means finding a furniture maker and having one made in mahogany or rosewood. I have seen these with beautiful 3 meter mahogany trussed beams in the auto design shops. I will not comment on these further since they are all slightly different and the method of setting them is usually obvious by inspection. Setting Beam Compasses to Radius The needle point is located on the steady leg, and serves as the center point of the circle that is about to be drawn.

With the beam finished, I made the pivot pin. It’s a 1/4″ bolt, cut to length and sharpened to a point:

A beam compass can also be used to make a series of repetitive measurements in a precise manner; the same as using a divider. Each point is rotated 180° along a straight line or large circle, and this process is repeated until the desired measurement or division is reached. The indentation created by the sharp point of the trammel is easily seen and makes a precise point to reference to the next location. After the glue had dried, I sanded the beam smooth on my belt sander platform, and trimmed the ends off: It got broke! Such is the state of modern manufacturing when a flimsy cast part is used and can’t stand up to just a few hundred pounds of wood and shop tools piled on it. Loose leg wing dividers [4] are made of all forged steel. The pencil holder, thumb screws, brass pivot and branches are all well built. They are used for scribing circles and stepping off repetitive measurements [5] with some accuracy.

Compasses-and-straightedge constructions are used to illustrate principles of plane geometry. Although a real pair of compasses is used to draft visible illustrations, the ideal compass used in proofs is an abstract creator of perfect circles. The most rigorous definition of this abstract tool is the "collapsing compass"; having drawn a circle from a given point with a given radius, it disappears; it cannot simply be moved to another point and used to draw another circle of equal radius (unlike a real pair of compasses). Euclid showed in his second proposition (Book I of the Elements) that such a collapsing compass could be used to transfer a distance, proving that a collapsing compass could do anything a real compass can do. Distances can be measured on a map using compasses with two spikes, also called a dividing compass (or just "dividers"). The hinge is set in such a way that the distance between the spikes on the map represents a certain distance in reality, and by measuring how many times the compasses fit between two points on the map the distance between those points can be calculated.

Shop Our Complete Line of Veritas Tools

Credit subject to status and affordability. Terms and conditions apply. Axminster Tool Centre Ltd trading as Axminster Tools is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. You are pushing the trammel at [B] while it is fairly snug on the beam. Lubricating helps here. To lubricate this design; tighten [B], screw the radius adjustment screw [C] off completely. Loosen [B] while holding the trammel point. It is under spring tension. It will slide off of the beam and it can be cleaned and lubricated with beeswax or hard paraffin. Lubricate the thread with the same. If you prefer an easy to print pdf version, Jay Bates took the time to make this one from the SketchUp file available above:

Occasionally I need to draw circles or arcs of a specific size, usually smaller ones. In the past I’ve used various ways to do this, often searching for the right size round thing in my shop or surrounding area. Much time can be burned up that way and after looking high and low, I still might not find the diameter I need. Under the two trays is a space for set squares, protractors and French curves. Apart from two large (45 and 60 degree) celluloid set squares that could be original (although they were catalogued as Vulcanite) the original items are all lost. There are two celluloid protractors and an angle template, all from different vendors, that are later additions.

Beam Compass 52 inch” by W H Harling with broad arrow marks and dated 1917. It is complete with its pen and pencil lead points stored in the centre fixture. The box is pine. Early Sets To get started, I cut two strips of hardwood, leaving them long. I then cut them to length and kept the off-cut ends. These pieces were then glued in at each end of the “beam”: Find sources: "Compass"drawing tool– news · newspapers · books · scholar · JSTOR ( November 2023) ( Learn how and when to remove this template message)

A beam compass and a regular compass Using a compass A compass with an extension accessory for larger circles A bow compass capable of drawing the smallest possible circles Circles can be made by pushing one leg of the compasses into the paper with the spike, putting the pencil on the paper, and moving the pencil around while keeping the legs at the same angle. Some people who find this action difficult often hold the compasses still and move the paper round instead. The radius of the intended circle can be changed by adjusting the initial angle between the two legs.Compasses are usually made of metal or plastic, and consist of two "legs" connected by a hinge which can be adjusted to allow changing of the radius of the circle drawn. Typically one leg has a spike at its end for anchoring, and the other leg holds a drawing tool, such as a pencil, a short length of just pencil lead or sometimes a pen. A while ago I bought a nice compass for sketching ideas on paper, to use at my desk. As expected, at some point it found its way into my shop and now has wound up in this debilitating condition: A compass, more accurately known as a pair of compasses, is a technical drawing instrument that can be used for inscribing circles or arcs. As dividers, it can also be used as a tool to mark out distances, in particular, on maps. Compasses can be used for mathematics, drafting, navigation and other purposes. I have this set up as you usually find them, steel point is adjusted. I actually find it easier to control the point while I adjust if I reverse the points so that I am holding the compass at the lead point as I adjust it; I hold the steel point on center with one hand and adjust with the other. Personal choice. The handle, a small knurled rod above the hinge, is usually about half an inch long. Users can grip it between their pointer finger and thumb.