Sika Sikabond 5500s Parquet and Wood Floor Adhesive | Solvent Based Rigid Adhesive for Wood Block and Engineered Wood Flooring - 16kg

Product Information

Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner.Anhydrite screed / Anhydrite flowable screed:

If, according to wood floor suppliers or producers deviation from the standards is permissible, temperatures between 5°C and 35°C must be observed for the adhesive. The substrate must be clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. The product and its vapours are highly inflammable, ensure adequate air ventilation during application and curing.To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. the Sika® AcouBond®-System: solid wood boards (tongued and grooved), 3-ply engineered wood as well as chip boards can all be bonded; Today'soffering is something we get asked often, as it's something alot of people try and do themselves to save some money. Sikabond 5500s can be used with a slight amount of bitumen residue on concrete floors but the more of this that is removed the better the Adhesion.

Fresh, uncured adhesive remaining on the wood floor surface must be removed immediately with a clean cloth and if necessary cleaned with Sika Remover 208. Test wood floor surfaces for compatibility with Sika Remover 208 before use. The laying instructions of the wood floor manufacturer as well as standard construction rules must be observed. underfloor heating: after through preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500S to 1 part Sika Thinner EG (by volume). Roller apply and allow to cure;That brings me nicely on to the adhesives that I would recommend, there are three, and I'm only mentioning 3 as I know these work if used correctly, I dare say there are many more products out there that work just as well, but I haven't used them so I can't say whether they are any good or not. to 1.2 kg per meter square depending upon size of notched trowel used and subfloor surface profile.