FireAngel FA3820 10 Year Sealed Battery Alarm Carbon Monoxide, Clear

Product Information

The FireAngel FA3820 is designed to be easy to install, making it suitable for both residential and commercial applications. It features a sleek and compact design, ensuring that it can easily blend in with any decor. FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel‑burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Activating your new FireAngel CO alarm All alarms are calibrated and rigorously tested in-house and are third party tested to receive the BSI Kitemark certification to provide peace of mind. Also, the new range is compliant with the revised European Standard EN 50291-1:2018 to ensure maximum protection. FA3322X4: Carbon Monoxide Alarm with digital display and 10 year battery

Battery powered carbon monoxide alarms can typically be installed wall-mounted or left free-standing on flat, level surface. Tenants, do you know your rights as a renter when it comes to CO alarms in your home? The Government announced its response to a consultation on the use of smoke and carbon monoxide alarms in domestic properties.The alarm’s high sensitivity mode will be enabled if the alarm predicts CO levels will increase to or above 180ppm for fast reaction to rising CO levels. FireAngel’s new range of carbon monoxide alarms use intelligent sensing technology for a rapid reaction to rising levels of CO.

If your CO alarm stopped beeping after being outside in the fresh air for 10 minutes, you may have a possible carbon monoxide leak in your home. We recommend calling your gas supplier or national emergency gas helpline on 0800 111 999 and await further instruction.

To activate your CO alarm, pull the disabling tab out of the alarm and wait up to 1 minute for the green LED to flash to confirm the alarm is active. After 1 minute, press the test button to hear the alarm sound. Please note, the alarm will not sound before the 1 minute activation period is complete. CO alarms and rental properties Once your CO alarm is activated and tested, choose to install the alarm by mounting on a wall or free standing on a shelf. Your alarm should be placed 1-3 metres away from any fuel burning appliance in your home, in living rooms or bedrooms.