Supreme Landscaping Products Jointing Compound Stone Grey Easy Joint 12.5 Kilo Patio Mortar

Product Information

Step 4 - once you are on our quote system, simply complete the form on the right hand and send over your request We have branches across the South Coast of England, including Poole inDorset, Winchester, Tadley, Romsey and Portsmouth in Hampshire. Internal showrooms are available to viewin Poole and Portsmouth and external displays are available at Portsmouth, Poole, Winchester and Tadley. I didn’t pre-seal my paving as recommended. There is a shiny residue on the paving surface. How do I clean this? Maintain the Width of Joint Throughout. Maintain at least a 3mm gap width throughout the depth of the paving material. Never have this type of paving butted together. See photograph.

Azpects EASY Sealer Remover is a high strength stripper which will dissolve the epoxy residue. Care must be taken to avoid damage to surrounding areas including UPVC frames, artificial/real grass and plants when washing off this product. Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints Top Up Low Spots. Use more EASY Joint to top up any low spots in your joints, repeating the washing process as described previously.The EASYJoint Pro mixture is likely to leave a residue over the paving, changing its appearance. This residue will over time wear away and eventually disappear, but for aesthetic reasons, most customers do not like this temporary condition. To avoid this, it is advisable to apply two coats of EASYSeal Ultimate which is a high quality, very effective, breathable sealer that will protect the paving by preventing the ingress of the resin contained in the EASYJoint Pro, which is what causes the marking. This process also provides the additional benefit giving of long-term protection against staining in the future. The compressive strength of EASYJoint is such that it will adequately take the downward forces exerted by pedestrians & domestic cars but is not designed toform a structural part of the path/driveway. The integrity of the project can onlybe maintained if the surface material is adequately bedded into the base, whichin turn is constructed to an appropriate specification. Buy With Confidence Less water is needed when applying EASYJoint to porcelain paving, as there is little risk of residue staining. You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. When applying to porcelain, to ensure an effective joint, the operator MUST strike the joint off, to compact the grout fully. Compaction forces out air and water which helps the joint harden faster. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. At least 24 hours before the planned installation of the EASYJoint Pro, on a dry day when no rain is forecast for 24 hours, seal the paving with EASYSeal Ultimate following the usage instructions on the bottle.

EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water. EASYJoint grout or jointing compound is a very straightforward, effective and visually appealing way to fill joints between paving, whether it is natural stone (such as Sandstone or Limestone) or Porcelain Paving. It is appropriate for all types of paving material provided there is a gap of at least 3mm wide minimum, we think 5mm is optimal and 25mm deep (narrow joint compound).Rainfall. Do not plan to install EASYJoint Pro during rainfall. The product is best applied in dry conditions and when rain is not forecast for at least 6 hours after installation. Should an unexpected light rain shower occur during the installation, it is unlikely to damage or compromise the quality or look of the joints but heavy rain may both affect the look of the finished joint and can wash away some of the ingredients causing a reduction in strength. Should heavy rain fall, immediately cover the jointed area and resume jointing once the rain has passed and the surface is free of puddles. Ensure that at least the minimum gap width is maintained throughout the full depth of the paving material. EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation. Once installed, freezing conditions will not impair EASYJoint All Weather Jointing Mortar. Wet the Paving. Thoroughly soak the patio or paved area to be jointed with lots of water using a hose. The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better.’ We strongly recommend not shortcutting this process, particularly when working with absorbent or sensitive materials such as Sandstone, Granite and Limestone. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. Not to be used for dry applications, all surfaces must always remain wet during application. FAQs Where are you located?

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods.Wet the paving, brush in the compound, then strike the joints for a smooth finish and stronger, durable joint. A single 12.5Kg Tub of EASYJoint will cover approximately the following areas of paving* Paving Size (mm) It is also worth pointing out that because dirty surface water can drain through the joint, over time it will result in a visual change to the EASYJoint colour. This is entirely natural; it is not a fault and it will not impair the integrity of the product. Smooth the joints:when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool