BGS 962 | Torque Wrench | 10 mm (3/8") | 7 - 105 Nm

Product Information

A torque wrench is a specialized wrench that is used to apply a specific amount of torque to a fastener. It is usually used in situations where it is important to ensure that the fastener is tightened to the correct level of tension. For example, when assembling a engine, it is important to use a torque wrench to ensure that the bolts are tightened correctly. Be sure to follow these tips to get the most out of your new tool! How Much Torque Can You Apply by Hand With a Wrench For example, 10 lb-ft is the resulting force from applying a force of 10 pounds at a one-foot distance from the fastener’s head. Even better, since it’s a 3/8” torque wrench you don’t have to spend nearly as much compared to some of the other options on our list. But even for a typical 3/8” drive torque wrench this one by EPAuto is available for a great price, and that’s a big part of the reason it’s our top 3/8” drive option.

Even better, you know you’re not going to need to replace it any time soon, even if you use it quite a bit. It’s extremely accurate with measurements you can fine-tune to a single in/lb, but it does start at 50 in/lbs. While that’s not all that high, sometimes for very small bolts on sensitive equipment there will be a smaller torque spec. If you’re a DIYer, then you know that having the right tools can make all the difference when working on projects around the house. One tool that is essential for many tasks is a torque wrench. While most torque wrenches measure in inch-pounds, there are some that measure in foot-pounds. The stakes are high with a torque wrench, which is why you don’t want to just trust any torque wrench and hope it’s doing the job correctly. That’s why we took the time to highlight ten of the best torque wrenches on the market today. Digital Torque Wrench: Digital Torque Wrenches often feature a digital display to provide accurate torque readings. Torque settings can be adjusted and additional features like audible or visual alerts may display when the required torque has been appliedWhen using a foot-pound torque wrench, it’s important to be aware of the conversion factor since most references will be in inch-pounds. For example, 80 ft-lbs is equal to 1,060 in-lbs. Whether you’re an experienced DIYer or just getting started, having a quality torque wrench in your toolbox is essential.

It’s not that we think the extension will affect the final torque spec, it’s just that all it takes is for you to get a little off-center to get an errant reading. If you use it properly there shouldn’t be a problem though. Torque is a value calculated by multiplying the force applied to a lever by the distance from which the force is applied to the pivot point. That’s why you will see that torque values have a force and a distance unit. Another perk this torque wrench offers is the outstanding torque range. At the low end of things, you can torque things down to as low as 25 ft/lbs, but for larger jobs, you can crank it up all the way to 250 ft/lbs.

Types of Torque Wrench

As you can see, there is quite a range in the amount of hand-tight torque needed for different types of screws and bolts. If you’re a car enthusiast, or even if you just own a car, you know that one of the most important tools in your toolbox is a torque wrench. Torque wrenches help ensure that lug nuts and other fasteners are tightened to the correct specification, which helps keep your car safe and running properly. But what do you do when you don’t have a torque wrench handy?

Even better, it can handle non-stop use, which is great for mechanics technicians that use a torque wrench as a part of their job. Effetto’s Mariposa Giustaforza II 2-16 Pro Deluxe torque wrench is a high-quality option. David Rome / Immediate MediaThe struggle here is it can be hard to read the raised numbers, especially if you’re wrenching in a poorly lit hotel room, or adjusting a saddle bolt upside down. It’s comfortable to use, but the hollow plastic construction certainly feels cheap and can lead to clearance issues in rare cases.

No single torque wrench has that kind of range, so if you have a wide range of jobs you need to complete and a limited budget, you’re not going to find a better choice than this. In that case, you’ll need to invest in multiple torque wrenches to properly torque everything down. While that can be a little frustrating, if you’re trying to save a little money the Pittsburgh Pro torque wrench set we highlighted above comes with three different torque wrenches that should be able to handle just about any job you have. Drive Size First is the maximum torque value. At 80 ft/lbs it’s high enough for most DIY jobs, but there’s certainly a chance you’ll come across a job calling for higher torque specs. Second, it’s not the most durable option. Torque wrenches are extremely sensitive pieces of equipment, and as such you need to store them properly to keep the calibration intact. Most torque wrenches come with a case, and we highly recommend storing them in this case whenever you aren’t using them. Torque wrenches are pretty accurate tools; they have an average precision of about +/-3 or 4%. Micrometer, split beam, digital, and gauge torque wrenches are the most accurate types, with a precision of between 1 to 3 percent.

Legal

But if you store them properly the amount of time they’ll last really comes down to how much you use them. If you’re only occasionally using the torque wrench for a DIY project, you don’t have to worry as much. On a micrometer-type torque wrench, as you turn the handle, the numbers on the micrometer handle will also rotate. Notice that turning the handle affects both the scale and micrometer numbers simultaneously. This is the most important thing you need to do after you finish using your torque wrench. Torque wrenches are extremely sensitive and leaving a load on the torque wrench for an extended amount of time will throw off the calibration.