Silverline Pipe Bender Guide 15mm (MS124/15)

Product Information

When Monument look to design, manufacture and market a new product we look to create products which will save the engineer time. In this particular instance, we have designed a smaller and lighter weight pipe bender than the standard combination 15and 22mm hand bender. A. Pipe wall size is a lot thinner than it used to be, plus the pipe bender former could be stiff (Answered by D S plumbing and heating on 26 Jan 2021) Bending pipes with a pipe bender is difficult. Its not actually difficult to bend the pipe, but bending the pipe in the right place is a different ball game. Working out the diameter of the bend and linking it to the place in the run where you want the bend to start and finish can only be done with practice and we would very strongly suggest you buy extra pipe to practice with.

throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM Pipe springs can be used in pipes up to 22mm diameter but bending a 22mm pipe with a spring is a herculean task which none of us would attempt. The copper pipe is then placed under the hook across the top of the wheel former (5) and under the stay. lighter in the hand than a combi. The Monument combi weighs more than 4kg; the XV weighs 1.5kg; the XXII weighs 2.3kg

Also, as with any other system in a house which contains many parts, the greater the number of pieces involved, the more there is to go wrong. If a pipe can be bent to do the job, it is impossible for it to leak. If it has fittings in the run, it certainly can! How to Bend Copper Pipe

Within this area you will find a great deal of information including how to pull 90 degree bends with 50mm offset bends at 30 degrees allowing you to bend round vertical pipe runs with a horizontal pipe run you are placing. Pipe benders come in a variety of sizes catering for copper pipes from 6mm to 38mm and are operated by hand. Mechanical benders deal with pipes bigger than this. pipe, bent with a spring is ok, but do not expect a very tidy job and read our project about how to box the pipes in afterwards as although it will probably do the job it will need hiding away! As the water flows down the "straight" all of a sudden it encounters a tight, right angled bend. Because the bend is so tight the water simply hits the side of the fitting before going round the corner.

Sort By

This is one of the reasons plumbers prefer to use a copper pipe bender rather than simply cut the pipe and put a bend fitting like an elbow into the run to change direction. The Monument Masters 1215K, 1315XVE (replacing the 1315Longarm ), 1222G and the 1322Extended Pipe Bender are #MadeInBritain. First models of the new pipe bender were designed and 3D printed in the engineering suite at Monument. We standardised the handle diameters for both sizes. The nylon guides are integral to the pipe bender helping to ensure they don’t get lost or damaged in a toolbag. Codes for these spare guides are 1216N 15mm Spare Nylon Guide and 1223J 22mm Spare Nylon Guide. The handles (2) are opened wide which allows the hook (1) and the stay (3) to be in a straight line. Mark the pipe where you want start of the bend. Position the pipe in the Former under the Retaining Hook. Position the start of bend vertically in line with the Pivot Pin.

Before you remove the pipe from the Former, view your bend angle; remove the pipe if it is correct, or if necessary, reapply the Lever Arm and increase the bend angle. Frequently Asked Questions FAQs We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender: We are currently using Royal Mail Parcelforce and DPD as our delivery providers, all small items will be delivered by Royal Mail, these can take up to three working days to reach you.We have also designed bending arm extension handles to increase the leverage for bending both 15mm 22mm copper pipe. These short threaded extension handles code 1224M fit both the 15mm XV XVE & XVL and 22mm XXII versions. One or more extension handles can be added for additional leverage. better sight lines– as the bend is in the same plane as the Arms of the bender it is easier to line up by eye The standard finish of the benders is a bright zinc plate on the Arms with rumbled aluminium Former and Lever castings. We will also be making available special editions with different finishes to the castings. Some of the Monument Masters have received laser etched and polished castings which look fantastic! Differences compared to a combi bender lighter in the hand than a combi. The Monument combi weighs more than 4kg; the XV weighs 1.5kg; the XXII weighs 2.3kg

The Monument single sized pipe bender measurements can be seen in the image. 15mm standard version is approximately 460mm and the standard 22mm version is approximately 670mm. Combi Bender 2600K MON2600To get over this, aluminium formers (6) are placed between the hook (1) and the pipe and also between the stay (3) and the pipe.