EASYJOINT Paving COMP Black 12.5K

Product Information

Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabs Eco-Friendly - the product contains natural ingredients found in nature, such as plant oils and extracts.

EASYJoint is available in a selection of 5 colours which is one of it's main selling points. Whatever your project, there is a colour suitable for it. Joint-IT has comparable colours, but only in 3 out of 5 colours. It's important to note that the two products aren't interchangeable, so if you've already started a project with one, you can't simply switch to the other, but the colours are a very similar with 3 of the ranges. EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water. The great thing about Joint-IT products is that they are expert hardscape products. They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. All while promising a strong and effect solution for your paving needs.Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. EASYJoint is perfect for patios, paving and paths that only have pedestrian foot traffic, however will not withstand the weight of a car or larger van. We do not recommend EASYJoint for use on driveways due to the types of sub-base and bedding mortar needed. Should I seal my paving slabs before using EASYJoint brush-in patio grout? Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. If sealer is applied after the patio has been laid, do not apply any type of sealer over the joint for at least a month after it has set hard. Only use a breathable sealer, otherwise EASY Joint may or may not remain permeable, and you may seal in any natural efflorescence passing through the stone. These natural salts will disperse over time. Can you apply EASYJoint in freezing conditions?

Storage: It is always preferable to store in a cool dry place, however, the material is not damaged by frost or exposure to cold/wet conditions. Zero Waste – Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water We cannot overly stress how important it is to use plenty of water before, during and after the application of EASY Joint. A hose with a fan type nozzle is perfect. Does EASYJoint stain sensitive & porous paving slabs? Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Are you looking for a sweep-in jointing compound or patio grout but not sure of the best product for you? In this blog post we look at both EasyJoint and Joint-IT colours. These are two of the highest selling jointing compounds on the market. In this blog we compare both products so you can see which one is the best product for your needs. What are Jointing Compounds?

Sorry

Do not use a pressure washer on the paving for at least 4 weeks after EASY Joint’s application. Always use a fan type nozzle at a 45 degree angle and no closer than 15 cms / 6 inches to avoid removing the jointing material from between your slabs. Is EASYJoint suitable for patios and driveways?