Washing Machine / Dishwasher "Y" Piece Hose Splitter

Product Information

This will mean that regardless of how hot the washer being discharged is, you are likely to get a small flood in your kitchen or utility room. But the connectors are too narrow for the pipe, and the tap needs to be in a Y shape ideally, so that both pipes connect roughly horizontally. Ensure your washing machine safely disposes of wastewater and by-products with our range of washing machine hoses and connectors. Useful to blank off an unused hot valve if you have a new washing machine that only needs a cold feed.

Washing machine and dishwasher inlet hose pipes (standard and extra long sizes), accessories and spares.As long as you can turn off the water, then all you need to do, is undo the chrome nut holding the existing valve on, pull off the valve, throw away the nut on the new valve, and just fit the double valve onto the existing nut on the pipe. Credit subject to status, UK residents only, Toolstation Ltd, acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. Splitter: The easier option, however, is where you leave your existing waste in place and connect the two wastes to a ‘splitter’. You can then fit a 50 cm door to the front of the appliance which neatly covers the carcass and the spacers. If you’re attaching a plinth across the base of your cabinets, you may need to cut a groove in the top edge to allow the correct door opening.

NOTE : Some parts will look different to the original due to manufacturers modifications and updates. Once you are sure that frozen pipes aren’t the issue, follow the instructions in the previous ‘how to drain a washing machine’ section. So, when fitting a new washing machine, it is a good idea to learn how to install a washing machine drain hose.If you have a new washing machine or dishwasher but no wastewater outlet connection; and want to avoid the hassle of plumbing in a new standpipe to feed the wastewater to your drain, you can always use a sink and appliance waste trap.

A good solution is to run a spur from a socket to a switched fused connection unit above your work surface, and then a cable from this to an unswitched socket below the surface to serve the machine.The Quest Chrome Bath Filler Tap provides a contemporary look matched with great build quality and reliable function. If you do reach the point where you are not sure how to progress, hiring a washing machine or dishwasher repair tradesperson is usually the best option. Use this 3/4 inch BSP brass cap with rubber washer to blank a washing machine valve and prevent accidental flooding. We hope that this particular guide will help make your project simpler but sometimes you may hit a wall. Why not look at our waste pipes and traps to suit every plumbing situation and find the best one for you?

If you need help to find any Universal Installation Parts or any other Universal spare part please ask for assistance as we're only too happy to help you.

Washing machines and dishwashers need to be plugged into a standard socket, but a common problem in kitchens and utility rooms is that all the sockets are positioned above the work surfaces. You might be in a situation where you want to install both appliances but there is only a wastewater outlet for one appliance. You may need to unscrew the hose from the U-bend under the sink, remembering that this is likely to disconnect your sink waste temporarily too.