BROTHER LS14 Metal Chassis Sewing Machine

Product Information

This reliable, lightweight machine is great if you’re just getting started with sewing or want to make sure you can cover those basic alterations and repairs yourself. If it’s a big deal for you to have really neat-looking, consistent stitches, go for a mid-range machine instead. In the event a malfunction occurs or adjustment is required, rst follow the • troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. The Brother LS14 has basic features such as a Free Arm with Removable Cover, Standard Foot Pedal, and an Inbuilt light for safe and easy sewing.

Always unplug the machine from the electrical outlet when making any 2 adjustments mentioned in the instruction manual: To unplug the machine, switch the machine to the symbol “O” position to turn it off, • then grasp the plug and pull it out of the electrical outlet. Trial sewing Stop the machine with the needle in the fabric at the point where you want to change the sewing direction, and then raise the presser foot lever. Cuffs and narrow trouser legs most likely wouldn’t fit around the smaller arm unless their circumference is larger than 32cm. It doesn’t matter how much you change the speed during a line of stitching, the stitches are consistent. Simply Sewing magazine’s Technical Editor Roisin loves every part of the dressmaking process, from sketching to sewing the final design, and enjoys working with luxury fabrics such as silk and chiffon.Lifting the • machine by any other part may damage the machine or result in the machine falling, which could cause injuries. In comparison to some higher-end machines the options are limited but really these 14 options are all that you need – the only missing stitches would be edge finishing stitches (which you can use zig zag stitch for), eyelets (not really an essential!

More expensive machines have a better feeding system which solves this, like my Brother innov-is a150. Our expert testers try out this entry-level sewing machine – perfect for beginners or those looking for a second machine to take to classes or sewing clubs! You’ll probably never sew 8 flat layers of denim, but you will sew 6 layer seam allowance humps, and that’s when machines often struggle. Operation Manual Sewing Machine IMPORTANT SAFETY INSTRUCTIONS Please read these safety instructions before attempting to use the machine. I recommend to beginners or novice seamstress' to purchase one of these as it's great as a first sewing machine or one that is compact too.

There’s a handy thread cutter on the side of the machine, saves you constantly reaching for your snips too! The needle positions on this model also appear to be limited and may only be controlled using the inbuilt stitch presets. You’ll need to experiment with the tension for thin jersey, silk, and chiffon, but you can create (mostly) smooth and flat seams.

Expand the work area of your sewing machine with an easy to attach, extra wide extension table that is perfect for larger sewing projects. I don’t have any visual or hand mobility issues, but a needle threader is still a must for me, it can shave five minutes off your prep time and get you sewing quicker! The Brother LS14s sewing is an entry level sewing machine that is intended to be affordable and easy to use. The stitch length and width can be easily adjusted, allowing more control over the stitching outcome. The top of the machine also has clear illustrations showing how to thread the machine and wind the bobbin.

com, and you can also take a look at our accessories page to make sure you have everything you need to get started. X53/X54/X55/X56 XF3656-001 To sew in reverse, push • the reverse sewing lever in as far as possible and hold it in that position while you lightly push the foot controller. Lovely machine, smooth and quiet am only a beginner and have done so much with the machine and learning more and more.

There are five stitch length options (for straight stitch), plus left needle position, six zig zig stitch widths and lengths a four-step buttonhole option, blind hem stitch, stretch blind hem stitch and a three step zig zag stitch for attaching elastic. The manual is quite brief, however there are good basic instructions for the features of the machine as well as an instructional DVD. Here’s what I found annoying: the stiff backstitch lever, bad lighting, the thread jumping out of the needle, and the lack of a “normal” manual. Adjustable upper thread tension gives you complete control over the tension of the upper thread and this tension can be manually adjusted to balance the tension of your stitches.

g. if you book a rental for on Monday evening for Wednesday morning), then this cooling-off period does not apply. It’s rare that you would need two spools at the same time though, this would only be useful if you wanted to use a twin needle. There is also no needle threader – which is a must for those with visual impairments or painful/unsteady hands.