J Roller - for laminates and Edging - Solid & Strong for pro use - 12 inch

Product Information

The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. Bought these on a whim rather than the sandwich cups, and the only thing I regret is that the M3 doesn't come with these in the first place! Be sure to let the contact cement dry on both surfaces as recommended on the can before putting the two parts together.

I Pour on the adhesive and use a 6" paint roller to spread it evenly (rolling in both directions to assure complete coverage AND even thickness) I work quickly and stop rolling just as the adhesive starts to get tacky to the roller. Please contact the card-issuing bank with questions about when the credit will be posted to your account. In my experience, if the contact cement is dry to the the touch on BOTH surfaces it will stick and NOT let go. When you put the two coated pieces, have them lined up where you want them, since there will be no adjusting the pieces once they touch. The Rubber sleeve is not glued on the bearing roller so you can slide it over 'off centre ' to recess the metal shaft.After the contact cement is dry - DON'T try to just put in on by hand - use a bunch of "stickers" in between the two surfaces - place the laminate on top - center it - then pull out the middle sticker. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods. The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. Credit subject to status, UK residents only, Axminster Tool Centre Ltd trading as Axminster Tools acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

I put slats on the substrate and put the formica on the slats, position it and start pulling slats out and pushing it down. I have the 3/4 Ply and the laminate along with the Contact cement, but how do I best get the laminate pushed onto the top. The Standard J Roller features a 1-1/2" diameter x 3" wide non-marring rubber roller with a 10" long handle and vinyl grip. About the only place I've ever had to use two coats is on the edges where the first coat tends to get soaked up a bit. Specially designed tool for application and even pressure distribution on various surfaces such as peel and stick wood planks, veneers, laminates and edge banding.

Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.On my hands and knees (the way I greet my mistress) rolling her weapon of choice across the floor, and to date, it has remained adhered.