276°
Posted 20 hours ago

Varilight JQP401W V-Pro 1 Gang 2-Way LED Trailing Edge Dimmer Switch, White

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Some other lighting loads, including some types of LED lights, perform best with leading-edge control. For best results with low voltage lighting use VARILIGHT intelligent dimmer switches with VARILIGHT electronic transformers. There is no limit on the number of transformers you can use as long as you keep within the maximum rating of the dimmer. VARILIGHT electronic transformers are suitable for controlling 12V a.c. rated LEDs (MR16). V-Pro dimmers are not suitable for wire-wound "toroidal" transformers.

To enhance compatibility with the ever-increasing range of lighting options now available to customers, V-Pro dimmers are programmable to offer a choice of dimming modes. In addition, users can set the minimum load level for the dimmer to optimise the dimming range of a particular lighting load. Some LED lights do not illuminate at low brightness levels as they require a large amount of power to illuminate. The V-Pro dimmer has an additional Drive function that provides LED lights more power at start up. To enable the Drive function

Cut Off & Delivery Times

The Varilight V-Pro dimmers are set to run in trailing-edge mode (MODE 1) by default. This versatile mode is suitable for most types of lighting, including many dimmable LEDs. To help with this process Varilight have produced an excellent video which is below Written Instructions

So here is a guide to programming the Varilight V-Pro Dimmer. The Varilight V-Pro Dimmer Programming Guide Many people prefer written instructions to follow step by step as they usually contains details missed in videos, or put something a different way making it easier to understand overall. way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.Traditional incandescent light bulbs work in one way; turn on the switch, electricity flows through the filament heating it up and producing light. Very simple.

Some LED lamps do not show the programming steps as clearly as others. In this case swap for a different make of LED lamp or change to a traditional lamp for programming. If you have recently decorated, please note that it can take several weeks for the chemicals in paint or wallpaper paste to become inert. Before this time there is a danger that the will react with the product if it has a metal faceplate. For this reason we recommend using a plastic bag as a temporary gasket between the product and the wall once it is dry to the touch. I other words, use the plastic to form a barrier between the product and the surface of the wall.Here's an example. In your lounge there is a light fitting with 2 x 20W light bulbs currently controlled by a single switch. You want to buy a dimmer to replace the switch. In your local DIY shop there are two dimmers available, one with a minimum rating of 40W and the other 60W. In this case the total lighting load is 2 x 20W = 40W. Therefore you would need to choose the dimmer with the 40W minimum load. To return the dimmer to MODE 1, follow the same procedure again. The light will flash once. This will show the dimmer has returned to MODE 1. Do not use masking tape on any decorative products. The adhesive may chemically bond with the surface finish. How can we reset the dimmer? The dimmer can be reset to its factory settings, and this will restore the driving mode to trailing edge (MODE 1) and default minimum brightness setting. If your products are permanently damaged it may be that you can claim on your house insurance for replacement products.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment