Joined in 2023 
82 
63 About this deal
After using PC-11® clean up using methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner to clean tools and mixing surfaces before PC-11® cures. Paste epoxies give extra working time for large jobs and are the strongest epoxies in the PC-Products family of repair products. The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings. EMP160 is an advanced glass-filled epoxy laminating/reinforcement paste used for the production of high temperature composite moulds/tools up to 160°C. Working in a garage or outside in temperatures between 10c-15c may double the length of time needed for full cure.
If you’re not sure whether PC-11® is right for your repair project then please get in touch with us and we’ll do our best to help. Mild steel and other metallic substrates shall be degreased, power wire brushed or grit blasted and vacuumed free from dust.
Our team welcomes you to browse online at all our products so you can get everything you need in one spot. Remove contaminants such as dust, dirt, oil, barnacles and grime with a solvent such as methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner.
Enter the diameter of the pipe in millimetres, the length of the repair area and the coating thickness of Industrial Metal to be applied.Like epoxy itself, our pigment pastes are fairly sensitive to temperature when it comes to their viscosity. Concrete substrates shall be sound, clean and free from dust, dirt, grease, oils, laitance and other contaminants. Before applying Industrial Metal Rapid 5 Minute, surfaces should be free of paint, rust and grime before being roughened up through either grit blasting or grinding with a coarse wheel or abrasive disk pad. However, for mixing purposes we always recommend adding the pigment to the resin part BEFORE adding the hardener to allow you plenty of time to properly mix, so that means you will just need to plan ahead slightly so you know what your total resin and hardener mix will weigh. If you would like to keep up to date with our latest news and interesting articles then check out our social media.
When a dispersion is then added to the bulk of the epoxy it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps). The mix may be sticky should the temperature be above 15 degree C and dusting with a powder (even plain cooking flour will suffice! NACE and CSSW certified technical support for all products with full project support available where required. We wouldn't sell an old pigment but I have experience of using 3yr old pigments and encountering no problems. Our containers make dispersion easy, so you can use only what you require for each artistic concept.Discover more about “Made in Italy”, a label synonymous throughout the world with refined materials, attention to detail, and creativity. repaired a wax melt dish that had a piece missing, waited 24hrs sanded it down and painted it, dish is 100% repaired :) Just remember to mix enough together to avoid having too much or too little of either epoxy or hardener. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Professionals to the do-it-yourselfers select PC-7® because of its exceptional adhesion to metals, ceramics, masonry and many plastics. For this reason, it is suggested to limit the maximum service temperature of moulds reinforced using EMP160 to 120°C unless special measures have been taken remove the possibility of air voids.
Great Deal 
New Comment