276°
Posted 20 hours ago

2 Pack Epoxy Garage Floor Paint - 5 litres (Light Grey BS00A05)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. When mixing with a mechanical mixer you need to be sure that it is set at a low speed. It may be tempting to crank up the speed to try and mix it faster, but the heat that will be generated from mixing faster would cause issues further down the line. The heat affects the reaction between the base and activator, and has a detrimental impact on the curing. As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10°C during application or during the drying process. In confined spaces provide adequate ventilation during application and drying.

A: We do not recommend our products going over self levelling compounds. However, some manufacturers say that they can be painted, so it's best to speak to Sika and ask them. They may say that a two part, water based epoxy resin can be used, if this is the case then ours would fit the bill but we couldn't guarantee anything. The problem with self levellers is that they are generally used as base for laying carpet, wood, vinyl or tiles over, they are not usually strong enough to traffic directly, therefore if you paint them the leveller would break up taking the paint off with it. Also, paint doesn't tend to bond that well to self levellers - sorry to be the bearer of bad news! The datasheets not only give you instructions on how best to use and apply the products, but they also give crucial information about mixing two components. The three main things to look for are: the length of time recommended to mix the product; the potlife after mixing the two components; and also whether or not an induction time is needed. Mixing the product: To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.The floor was prepped and them primed with the epoxy sealer coat, before being finished with the top coat in light grey.

Slip resistance can be enhanced by incorporating our medium grade anti-slip aggregateadditive into the system. Scatter the aggregate onto the wet first coat, this should be allowed to dry, then the loose particles brushed away before applying the second coat. Of all of the mistakes, this is the most difficult one to fix. If you have applied one of the components, then applying the other one over the top, or trying to mix it on the surface won’t fix it. The whole thing would have to come up and start again. So you really need to make sure you get this part right the first time! Once the base and the activator have been mixed then it initiates the chemical reaction that causes it to cure. So once the two components have been mixed you have a limited amount of time to apply it before it has hardened too much. Often it is recommended to keep stirring at different intervals throughout to give you some extra time to apply the whole mix.Thank you for your interest in our product. I do believe the coating would be a good option for a decorative finish. Once fully cured there is unlikely to be any problem with water spilt on the surface, though standing/pooling water could cause the surface to discolour.

The winner of our June #showusyourproject competition is a local flooring specialist, @purtfloor of Hartshill, Stoke-on-Trent. If the specified induction time is not followed then it can lead to further issues, such as: a lower gloss level, yellowing, blushing, colour variation and more. Common mistakes: On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. Drying Time- Touch dry in 30 minutes, hard dry after 12 hours. Recoatable after 16 hours (minimum) and prior to 10 days (maximum). Mixed pot life: approximately 12-16 hours. If the parts aren’t mixed together properly then some parts of the surface won’t dry at all. Patches of it may dry, but there will be some bits that haven’t reacted. The only thing to do if this happens is unfortunately to start again.

Common mistakes:

floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know. A husband and wife team, they are one of only three businesses in the UK who still make pressed aluminium number plates on the original flypress. Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not. This can be from either not getting the work done fast enough or from not stirring the product intermittently when applying. You can combine 5L (30m²) and 2.5L (15m²) for areas which are not multiples of 30m² in size and more than one coat is required. For example, to cover 45m² with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.

Two coats of Resincoat HB Epoxy Garage Floor Paint can provide the equivalent of ten coats of conventional coatings containing solvent or water based epoxy products. Our floor paint is the perfect choice for your garage or car service centre as it is oil tolerant as well as being resistant to any other automotive fluid that would ruin standard paints. We are passionate about championing businesses such as Simpson and Co. The last year really has been a battle for many small companies who have fought to stay afloat during the pandemic.Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away. If the induction time was not followed then there are a good few issues that can arise. They are mostly aesthetic, but nonetheless problematic. Q: I’ve levelled my floor with Arden k301 which I chose because it is suitable for overpainting with resin paint.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment