Watersafe Drinking Water Test Kit for Lead (Single)

Product Information

Aside from filtering lead out of your water supply, you can reduce your exposure to lead by doing the following:

Take a coin, key or screwdriver to scrape the pipe’s surface. If the scraped part reveals a shiny or silver surface, it’s a lead pipe. The EPA recognizes two other lead test kits that meet the requirements and negative-response criteria of the Renovation, Repair and Painting Rule to help protect American families and communities: the D-Lead® Lead Paint Test Kit manufactured by ESCA Tech, Inc., and a specific lead test kit that is available for Massachusetts inspectors and risk assessors. While these lead test kits may be available to the public, EPA only recognizes tests conducted by certified inspectors, risk assessors and RRP-certified renovators. If you are welcoming a baby into the house, you should test for nitrate specifically in the early months of pregnancy, again before you bring the baby home, and once more during the first six months of the baby's life. The EPA recommends testing in the spring or summer season, especially during the rainy season. Lead is not evenly distributed in water. So, carrying out a single test from the same source won’t give you reliable results.

UK Shipment Options:

The water pipe that joins our water main to your property is called your service pipe. This is split into two parts. Ideally, it’s best to get rid of the lead source entirely. For instance, a lead tap, old pipes or an old well pump could contribute to lead in your water supply and it’s best to replace them immediately. The amount of lead in water caused by lead piping is greater when the water has been sitting in the pipe for a while, ie. in the first water of the morning. It is therefore important to let the water run to flush the pipe before using it. Because lead levels in the water can vary throughout the day, it is recommended to test your drinking water more than once – ideally throughout one day whenever you use your water for consumption. Yes, you can. You can use one of the above lead water test kits for this. We recommend running a professional test conducted in a certified laboratory. Of all the DIY lead water testing kits we tried, the Safe Home DIY City Water Test Kit produced the most consistently accurate results across multiple tests.

Other impurities. If your home water has several other contaminants, they’ll compete with lead to get absorbed in the filter medium. So, the reduction rate goes down automatically. By testing the kits in this list, we could easily determine a test’s ease of use, its standout features, and the accuracy of its results.Tests carried out by an EPA-certified laboratory or state are undoubtedly highly precise. But the accuracy of the results also depends on how you collect the water sample; make sure you do not commit any errors. There are many effective EPA-approved means of lead removal, including reverse osmosis systems, activated carbon filtration systems and whole-home filtration systems. I’ve produced a full additional guide that includes all the latest tips and info on how to remove lead from drinking water if this is a problem you’re facing. This kit delivers slightly faster results than the Tap Score kit. You’ll receive your results in 1-3 days of the sample arriving at the laboratory. It's easy to take water for granted — unless you see, smell, or taste a difference in the water coming from your tap, you probably don't think twice about potential contaminants or bacteria. For those who are routinely falling ill, especially with gastrointestinal issues, that may eventually clue you into an underlying bacterial issue in your home's tap. But the somewhat hair-raising reality is that many common water contaminants, including arsenic, are odorless and won't alter the color or taste of the water coming out of your sinks and tubs. If you have opted for an independent plumber, you will need to let us know when you are ready to conduct the reconnection survey.

DIY testing is cheaper and provides instant results, but it isn’t as thorough, detailed, or accurate as laboratory testing. Lab testing can typically detect a bigger range of contaminants, but it’s more expensive than DIY testing. We own the communication pipe that starts at our water main and usually runs to the outside stop valve at your property boundary. We’re responsible for fixing or replacing these pipes. Pipework that’s your responsibility Nonetheless, service lines of public water systems as well as your home pipelines, solders, and fixtures may contain lead that can easily make its way into your water. Positive: Top line (next to number 2) is darker than the bottom line (next to number 1), or lines are equally dark.Yes, home lead water tests are accurate – to some degree. These tests can only give a rough estimate of your water’s lead levels. We don’t recommend DIY tests for lead because they’re not accurate enough for such a dangerous contaminant. If you suspect your water contains lead, you need to know for sure whether or not it does – and how much it contains. How do you test for lead in water yourself? Copper is a contaminant that’s similar to lead – many residents drink it in the water that’s sent to their homes. The difference is that copper is needed in small amounts in our bodies, but too much copper, especially when accompanied by lead, can be dangerous. Individuals who receive their water from a community water supply or water utility should have access to an annual consumer confidence report or water quality report... Individuals using private well water do not have access to this kind of information, as private well water is generally not required to be monitored for contaminants. These families may want to have their well water tested annually by a state-certified commercial drinking water laboratory," notes Sydney Evans, science analyst at the Environmental Working Group.

Once lead enters the human body it is accumulated there and only very slowly removed. Latest medical advice suggests that lead is most harmful when it is allowed to build up in the body. High levels of lead can cause serious damage to the brain, kidney, nervous system and red blood cells. The greatest risk, even at short-term exposure, exists for: If you’re planning to buy a lead test kit, you probably don’t know much about your water quality right now. Perhaps you only want to test for lead – but it’s worth noting that the best-value tests are often those that test for multiple contaminants.Anyone who’s keen to make a smart investment in a reliable lead test that’s worth the money. We’ve only reviewed lead test kits from popular, reputable manufacturers with a long history of customer satisfaction. The Safe Home test is still nowhere near as comprehensive or accurate as send-away test kits. We’d recommend following this test with a laboratory test if lead is detected.