276°
Posted 20 hours ago

Spares2go Dual 2 Line Bump Feed Spool Head for Kawasaki Strimmer Trimmer Brushcutter (Standard Fitting + Spring)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

As the cutting line is used, it wears down. New cutting line needs to be fed into the head from the spool, and there are a few different ways strimmer heads can do this. It’s also worth bearing in mind that the strimmer head and line can only be as powerful as the machine they are attached to. This makes it one of the best strimmer heads if you’re looking for an easy way to load line – quite a relief, given that this process can be far from easy on other models.

Naturally, if you buy the wrong type, you won’t be able to fit the head onto your strimmer. Most petrol strimmers have a ‘male’ bolt end, but this isn’t always the case. A useful strimmer head to buy on a budget, the Trueshopping Bump Feed Strimmer Head is a cheap but reliable replacement. Manual feed strimmers require you to pull new line through by hand. Naturally, there are advantages and disadvantages to this. You need to make sure that the strimmer is completely off, and uplugged/not able to turn on before manually adjusting the line. It’s also a messier process than other line-feed options. However, you can have total control over how much line is used, and you don’t have to rely on a sometimes-unresponsive bump-feed system.Although it is only intended for use with Trueshopping strimmers, it fits other models as well; however, it’s difficult to know which ones exactly without trying it, therefore there is a bit of risk involved if your strimmer isn’t from Trueshopping. If the strimmer has a ‘female’ bolt end, there will be a threaded bolt shaft on the end of the strimmer (the threads will be on the inside of the bolt shaft). Compatible strimmer heads will have hole in the centre, which a bolt will be fitted into. When the strimmer head and the bolt are fitted over the strimmer’s bolt shaft, the strimmer can be twisted into place. The bolt will connect in to the threaded bolt shaft. Strimmers can either have a ‘female’ or ‘male’ bolt end, which is the end that the strimmer head will attach to. You need to know which type your strimmer has, to make sure you’re buying a strimmer head that will fit.

It comes pre-loaded with 5 m of 2.5 mm diameter line and is easy to attach to the strimmer without needing to undo the entire head. The head screws on easily and can be fitted in minutes. If the strimmer has a ‘male’ bolt end, there will be a bolt shaft on the end of the strimmer with exposed threads (the threads will be on the outside of the bolt shaft). Compatible heads will screw onto the bolt shaft without requiring an additional bolt.

My Top Recommended Strimmer Heads

Because of its price, this is one of the best strimmer heads to buy on a budget; however, there are some caveats to go with it.

This large Oregon Professional Strimmer Head is a great choice for anyone who struggles to load line into their current strimmer. It’s also a sturdy strimmer head that is simple to attach to compatible models. One of these accessories is the line, and the other is the strimmer head. Although the head that comes with your strimmer will likely be sufficient to begin with, there may come a time when you need to use a different one, or it simply needs replacing. An automatic-feed strimmer head is useful if you don’t want to keep bending down and don’t like bump-feed mechanisms. This can make strimming more comfortable for a range of people.When it comes to useful gardening tools, a strimmer is certainly up there. But the story doesn’t end there, and there are additional accessories that can alter the effectiveness of a strimmer. However, if you’re only going to be doing lighter tasks, such as cutting through grass and weeds, you can choose a strimmer head compatible with round line . Some strimmer heads are compatible with both round and square line, making them particularly useful if you have a range of tasks to complete. Automatic mechanisms can be particularly inconvenient if you are using a cordless strimmer because you will likely turn the unit off while you move around the garden to conserve battery. This is problematic if more line is released each time it’s turned on. Some strimmer heads are compatible with both round and square line, whilst others are specific to one type. Although this strimmer head is compatible with a lot of strimmers, it is quite large and needs to be used with machine with sufficient power; it will fit most straight shaft strimmers over 33 cc. There’s no need to take the head apart to secure it in place and it is easy to fit with the five screws provided.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment