House Mate Liquid Gold Wood Reviver 250 ml

Product Information

Bring out the natural beauty of your wooden furniture and keep it that way with House Mate Liquid Gold Wood Reviver. Note: certain types of wood surfaces may leave a raised grain effect after pressure washing is completed. Sanding or poly pad scrubbing may be required to smooth out this condition. After removing the previous coating, it is important to protect your exterior wood with CUTEK® Extreme to repel and displace moisture, and extend service life. Do NotuseLiquidGoldWoodCleanerandReviveron bleached or simulatedwood,or on painted, waxed, synthetic, laminated or decorated finishes.

Liquid Gold Wood Wipes | Lakeland Liquid Gold Wood Wipes | Lakeland

Wet your wood prior to applying CUTEK® Wood Reviver. Apply CUTEK® Wood Reviver liberally to wetted wood with a brush, roller, broom or low-pressure garden sprayer. This product can not be sent to Northern Ireland, the Channel Islands, Isle of Wight, Isle of Man or the Scottish Islands. Remove the previous coating using CUTEK® Wood Stripper. It is safe, user-friendly and is suitable to remove multiple layers of most commonly used wood coatings.Rinse off thoroughly, using a pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern. REMOVAL WITH A GARDEN HOSE IS NOT SUFFICIENT. Spreading rate is approximately 1 US gal of CUTEK® Wood Reviver per 200-350 ft2 of surface area to be restored. CAUTION must be used to avoid damage to the wood fiber and ‘furring up’. Adjust your cleaning process by reducing the pressure or your operating distance from the wood. DO NOT use “turbojets” on wood.

Mate Liquid Gold Wood Cleaner and Reviver 250ml House Mate Liquid Gold Wood Cleaner and Reviver 250ml

Maintenance with CUTEK® Extreme is simple, easy and cost effective. Simply clean and recoat – no need to sand or strip. CUTEK® Wood Reviver is a powerful timber restoring agent and can be used diluted or undiluted. Coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.Rinse from the highest point and work down methodically using long even strokes in the direction of the grain, until there is minimal to no sudsing. The longer that CUTEK® Wood Reviver is left on the wood, the greater the rinse time required. Before you begin to Prepare and Protect your wood, note the hazards and precautions and ensure that you have obtained and know how to use the correct safety equipment as detailed in the Safety Data Sheet.