Aico Ei208WRF Carbon Monoxide (co) Alarm Radio Link

Product Information

The Ei208WRF Carbon Monoxide Alarm is supplied with a powered-for-life sealed Lithium battery. It contains a high performance, proven 10 year electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide (CO). Each sensor is individually calibrated and tested in Carbon Monoxide gas to ensure accuracy. The Ei208W Carbon Monoxide Alarm is supplied with a powered-for-life sealed Lithium battery. It contains a high performance, proven 10 year electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide (CO). Each sensor is individually calibrated and tested in Carbon Monoxide gas to ensure accuracy. The Ei208WRF is RadioLINK + enabled to communicate with compatible Ei Alarms and accessories. Up to 12 RF devices can be interconnected. End of Life indicator: notifies the user when the alarm needs to be replaced at the end of its 7 year life of operation.

CE marked and Kitemarked to BS EN 50291-1 (domestic use) & BS EN 50291-2:2010 (camping/caravans/boats) The Ei208WRF is a RadioLINK Carbon Monoxide (CO) Alarm that is powered by a sealed-in Lithium Battery. The alarm has a high performance, proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in CO gas on assembly to ensure accuracy. The alarm has RadioLINK interconnectivity which enables wireless transmission of a CO alarm condition to other RadioLINK alarms and accessories. This is the Ei Electronics Aico Ei208WRF RadioLINK Carbon Monoxide Alarm with a Powered-for-Life Lithium Battery. This CO Alarm comes supplied with a sealed Lithium battery and an RF interconnect module for wireless RaioLINK interconnection. It connects with other RadioLINK compatible alarms and sounds all alarms when it detects Carbon Monoxide gas.Mounting base: has a twist for multiple fixing points, making it easy to be secured to a ceiling or wall. Comes supplied with fixing screws. When the Alarm detects potentially dangerous levels of CO, the red LED flashes and if the CO persists the alarm will sound. The rate of flashing of the red LED indicates the level of CO. The higher the level of CO detected, the sooner the alarm will sound. This alarm is also enabled with RadioLINK+ technology meaning that you can link all the alarms together via Radio Frequency. Once you have installed the alarm, you will need to interconnect or ‘House Code’ the alarm into the system.

The Ei208W may be interconnected wirelessly with the RadioLINK + module Ei200MRF (sold separately or included in the Ei208WRF) to communicate with compatible Ei Alarms and accessories. Up to 12 RF devices can be interconnected. Indicator Lights: Power-up & Test - green light, Alarm - red light, Fault - amber light, Test / Diagnostic - Red, Amber & Green LightsThe Ei208DWRF is a carbon monoxide alarm featuring radio-interlink technology allowing it to communicate with other compatible alarms and accessories (including RF smoke and heat alarms, the Ei412 RF control switch and the Ei450 wireless alarm controller). Unlike other alarms, this unit features a ‘low volume test’ which allows the alarm to be tested without sounding at its full 85dB. These modern and stylish alarms also have a flat base which allows it to be free standing as well as wall or ceiling mounted, along with a digital display that will display current levels of CO in the atmosphere. The Ei208DWRF has a 5 year warranty and is powered by a long life lithium battery with a 10 year lifespan. High performance due to the proven electrochemical sensor to sense the presence of CO. Sensor is calibrated and tested in Carbon Monoxide gas to ensure accuracy. The memory feature allows an Alarm that has previously activated to be easily identified (as the red LED will continue to flash for 24hrs after the event or afterwards when you press the Test button).