Joined in 2023 
82 
63 About this deal
With bold coloured laminates such as carbon fibre, the underlying colour of the fabric may still show through the pigmented resin, especially with thinner layers of resin over the underlying laminate. As with many post-cure cycles for resins, the post-cure cycle for our EL2 and IN2 Epoxy Resins is not too sensitive and a range of different post-cure cycles will produce good results, specifically improved mechanical performance and elevated HDT/operating temperature. Post-curing parts that will be used at or exposed to elevated operating temperatures (such as vehicle bonnets/hoods in direct sunlight, engine-bay parts, car interior parts etc.) is strongly recommended to prevent distortion of the parts when they are put into service and experience these higher temperatures.
If the damage leads to a decrease in the load-carrying ability of the part, then users are presented with a choice: to repair or replace that part.Despite the strength and durability of carbon fibre fishing poles and fishing rods, fractures or complete breaks in the pole do happen from time to time. Although by no means an exhaustive list, the mould materials, pigments and additives listed below have all been tested and are known to work well with Epoxy Rapid Repair. Channel Islands; Inflatable dinghy price on request Channel Islands; Flares not available to ship at this time
Wrap the rod with the special 90g ProFinish plain weave carbon fibre fabric, applying additional resin as you go. To repair a damaged carbon fibre part, there should be an initial assessment. This is often a non-destructive inspection (NDI) which is a combination of visual and non-visual methods.This includes: (1) identifying and rectifying the origin of any fracture or damage, (2) the surface must be thoroughly cleaned and degreased, (3) loose carbon fibre debris is removed, and (4) appropriate support is installed before the repair process begins. Ambient Conditions: Can be used from 15 to 30°C although pot-life and cure time will be affected significantly. Recommended working at an ambient of 20-25°C. Safety Precautions: Wear gloves and goggles and work in a well ventilated area. Always read the SDS before use. ease of use : these kits come with all the materials needed to make repairs and refurbishments. There are also detailed guides and instructional videos available. Resin and 50g Hardner. Throughout testing many different resins this was the best available for this type of carbon fibre application. Gives a strong hard wearing glossy finish. (a cheap resin will not be up to the job).
Opened containers of resin, hardener, silicone or chemical release agent, unless found to be faulty or defective. The kit includes all of the necessary materials and equipment to repair a carbon fibre fishing pole and requires only competent practical skills and a couple of hours of your time to repair your broken or fractured fishing pole or rod so that it is as strong as it was before the damage occurred. This is a performance, economical and overall feasibility decision. Carbon fibre parts are expensive, so a repair is often preferable if the original properties of that part can be matched in the repair.
NO GOODS manufactured or sold by Advanced Materials Technology Pty Ltd will be accepted for a credit if returned after one (1) calendar month of original invoice date.
Great Deal 
New Comment