Joined in 2023 
82 
63 About this deal
Regular heat guns can reach up to 650°C (1,200°F), meaning they could cause serious burns if used without putting the proper precautionary measures in place first. This provides a heat over a wide area, although this will still be concentrated enough to do strip effectively. This reflector nozzle is perfect for intricate work, where a consistent temperature is critical to not damaging components. A heat gun is a device that produces a stream or jet of heated air that is projected from the front opening and is then usually used for stripping paint, varnish and other similar jobs. The heat is produced by a fan drawing air in at the rear of the gun, passing the air over heated elements to create a stream of hot air.
Heat Guns Guide | RS Heat Guns Guide | RS
Additionally heating paint can give off dangerous fumes so always strip paint using a heat gun in a well ventilated space and always use a suitable respirator face mask. Removing paint is the most common job for this tool, but heat guns can be used for lots of other things as well. This heat gun is an ideal addition to any tool kit, and great for removing tough nuts, for shrink-fitting components, making materials more malleable and drying out processes.The 9mm reduction nozzle delivers a hot air stream with pinpoint precision while the 14mm nozzle produces a slightly less concentrated stream, perfect for plastic welding. Plastic components and joints in pipes can be repaired with the use of heat, as it enables the materials to be moulded and welded. Reflector nozzles are used in electronics and various other industries to apply heat shrink tubing to wire and cables. Small holes that are punched into the side of the nozzle help disperse hot air along the length of the adapter and make it easy to pre-heat plastics before welding them. Most heat guns are compatible with interchangeable nozzles, helping to optimise how the tool works on different surfaces and tasks.
STEINEL Heat Gun Nozzles Guide - News - Hilltop Products STEINEL Heat Gun Nozzles Guide - News - Hilltop Products
Removing crayon from walls – heat the markings and allow it to warm the wax, then wipe the wax off with a cloth soaked in hot, soapy water. Heat guns should always be used carefully around copper pipe work where solder joints have been used or scotch connectors as there is a possibility of melting the solder or weakening the joint. They’re effective for removing stubborn stickers and labels on items like vases, drinking glasses, plates or windows as they warm the adhesive. Then you can heat the seam and feed a welding rod into the nozzle where it will be heated and applied. As you are passing the heat gun over the paint and scraping it you can easily pass the gun over your hand risking burns if you are not concentrating so make sure they are protected.
Flat nozzle: This directs the heat from the gun in a thin but extended area, which is ideal for when you need to direct the heat over an extended but narrow area. High powered with a remarkably stron 2,300 W motor, the GHG 23-66 Professional reaches up to 650° C easily.
Heat Guns - Machine Mart Heat Guns - Machine Mart
Children, animals and pregnant women shouldn’t be nearby when a heat gun is being used to strip paint, as the fumes emitted by the melting paint could be harmful. While the typical nozzle is an open and even heat output, there are different types of nozzles that can concentrate, protect, reflect or distribute the air. Lead was used in paint in the UK right up until 1992 although an agreement was reached in Europe in the 1960s to stop producing it. Although a naked flame is more dangerous than the hot air from a heat gun, the tool still causes other things to crack or catch fire, leading to shattered glass or injuries.Most heat guns will have a built in safety thermal heat switch which will terminate the device if a dangerous heat level is achieved. airflow rates, digitally adjustable temperature settings, and 4 customizable programs for total tool control.
Great Deal 
New Comment