Joined in 2023 
82 
63 About this deal
To help you filter out the plethora of cables flooding the market, take a look at things that should be on your mind when buying cables. Good impact absorption Most professional music creators and producers prefer XLR over TRS, but there are cases when the latter is a more sensible choice. Whether you are recording or creating music, you want a clear and crisp sound quality. While many factors can influence sound quality, your choice of audio cable has a drastic impact on your audio project quality. The XLR connector is designed to send electrical signals from devices in the same direction. Audio industries and audio engineers often employ microphones to transmit audio signals that are electrical energy between devices. Mixing devices such as audio devices use a connector XLR to transmit signals. An unbalanced audio cable comprises two main parts, a ground wire, and a signal. The former acts as the one who delivers audio frequencies, while the latter acts as a reference point and also serves as a shield from outside interferences. And while it does an excellent job of preventing slight hums from street lights and transformers, they also act as an antenna that, ironically, produces noise.
The SC9 is a TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RØDECaster Pro. SC10 – 3.5mm TRRS to TRRS Cable Finally, a TRRS cable is just like the TRS but with the inclusion of a microphone channel. A common application for this type of cable is a headphone, where you can not only listen but also speak through the built-in microphone. TRRS is favored over the other two types for multi-media device use. Pros and Cons of TRS The SC18 is a USB-C to USB-A cable. At1.5-metres long, it’s ideal for connecting USB-C devices such as the NT-USB Mini or RØDECaster Pro to devices with a USB-A input. SC19 – Lightning Accessory Cable (USB-C to Lightning) Balanced audio cables are typically better for longer cable lengths as it provides better protection from outside interference, but unbalanced stereo connections can be a good choice for studios under 10 feet in length as they are cheaper and more accessible. What makes a good cable?The SC5 is a TRS to TRS cable that comes with the Wireless GO II (not sold separately) for connecting it to cameras and other devices with a TRS input. It features a memory wire cable rather than a coiled cable like the SC2, making it easyto route around a camera. Expensive. XLR cable costs more than TRS cable. Sure, there are cheap XLR cables but they don’t last very long as they are low quality. It will not be cost-effective to keep buying cheap XLR cables. Again, XLR and TRS follow the same balanced connection principle but with different “ends” or connectors. XLR uses pins while TRS uses a tip, ring, and sleeve system. TRS connectors are easy to use and don’t need any extra equipment or cables to connect them. On the contrary, XLR requires an adapter to convert them into a TRS connector and then an additional cable between the adapter and your speaker system. This article advises you on the best connector between XLR vs TRS cable. So let’s get this debate going! What Is a TRS Cable?
As you can see with the differentconnections listed above, it’s important to pay attention to what type of cable is required for your microphone and recording device. There’s nothing more frustrating than trying to plug in your mic and realising your cable is the wrong kind!
The SC7 is a TRS to TRRS patch cable, designed to allow microphones with a 3.5mm TRS output, such a RØDE VideoMic or Wireless GO, to connect to devices with a TRRS input like a computer or mobile device. SC8 – 3.5mm TRS to TRS cable (6m) Although TRS and XLR don’t differ that much from each other as far as sound quality is concerned, there are many situations when XLR cables are a more favorable choice. Second, you should consider how much space you have available for your cable. If you need longer cables than a TRS connection provides, then an XLR connection may be more suitable for you. On the other hand, TRS connections are easier to use than XLR because they don’t require any special tools to connect or disconnect them. Just plug them into your device! The SC2 is a 3.5mm TRS to TRS patch cable used for connecting microphones or wireless receivers to cameras. The coiled cable means that the SC2 can easily extend from 170mm to up to 400mm.
The SC19 is a 1.5m-long Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. SC20 – USB-C to USB-A for Wireless GO II (Not Available Separately) An XLR (eXternal Line Return) is a line-level cable used to connect audio equipment. It’s a three-pronged cable with two signal wires and one ground wire. The purpose of the ground wire is to prevent interference from electromagnetic fields, which can cause noise in audio equipment.There are three types of shielding currently, specifically the serve, braided, and foil shielding, but their objectives are, all the same, to improve your overall sound recording quality. Cable length First, it’s important to know a little bit about the different types of cable connections you’ll come across in this list, what they’re used for, and what type of devices they’re commonly found on before diving in any further. For ordinary people like you and me, spotting differences between balanced and unbalanced cables might be confusing without using tons of technical jargon, but here is an overview of their differences. XLR outputs are used for microphones intended to be plugged into professional audio equipment like mixers and audio interfaces, such as our studio and shotgun microphone range. Cables will likely be tripped over by or get tugged a lot of times, especially in small studio-type spaces, so you would want a cable with good impact absorption that can easily take these occasional tugs without being damaged. Interference shielding
Great Deal 
New Comment