About this deal
Two coats of Rubbol Satura plus should be applied, allowing a minimum of 18 hours drying time between coats. The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish. In any event this period should not extend beyond three months,otherwise additional preparation and coating may be necessary.
We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items
5 Litre Tinted Colour
Timber surfaces to be treated must be clean, dry, and free from all traces of dust, dirt, wax and grease. The moisture content of the timber must not exceed 18%. This figure will be 14% or lower for interior timbers. New or Bare Timber
Second coat must be applied within 48 hours to provide full protection, if not applied within 48 hours light sanding with a medium grade abrasive, to provide a surface “key” will be required, ensure all dust is removed. Any mould and algae growth must be eradicated using a suitable fungicide or mould and mildew remover Knotting may be used to reduce extractive discolouration, however, knotting is not always fully effective in “sealing in” resin. In addition, the adhesion of coatings can be impaired.When filling, be sure to use fillers specifically designed for use with timber. General or all purpose fillers are not suitable, particularly on external areas, as they cannot cope with timber movement and work loose.Two coats of Rubbol Satura plus should be applied, allowing a minimum of 18 hours drying time between coats. On new work, Base stained/primed : Denib using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction high levels of natural wood extractives or exudates and some softwood can be highly resinous. Resinous deposits should be removed with a scraper. Any remaining residues should be removed using a lint-free cloth dampened with a suitable solvent, frequently changing the face of the cloth. Allow solvent to evaporate fully before overcoating. The use of both eye and hand protection is strongly advised. Rubbol Satura Plus: - can be used to give a stylish and long lasting opaque satin finish to exterior doors and windows. What is more, although it is primarily designed for exterior wood, Satura plus is a versatile finish than can also be used as a finish coat on suitable primed metals and hard plastics.
Degrease any exposed bare timber surface by wiping with a lint-free cloth dampened in methylated spirit If the second coat is not applied within 48 hours, light sanding with a medium grade abrasive, to provide a surface “key” will be required.All damaged or decayed timber must be removed and replaced, cutting at least 25mm into sound timber. When splicing in When filling, use a suitable wood filler specifically designed for use with timber, as general or all purpose fillers are not suitable, particularly on external areas
Sikkens Rubbol Satura Plus is a solvent based, satin finish for exterior and interiors joinery and suitably primed metals and hard plastics. It’s a durable paint with excellent opacity giving even coverage and protection on joinery for up to 5 years. A flexible formula that resists peeling and flaking. Can be used as a two part system with Sikkens Rubbol Primer. Always ensure product is fully mixed before and during application to ensure consistency in colour and sheen.Like all the Sikkens Rubbol range of exterior opaque coatings, Satura plus is formulated to add solid colour and provide optimum protection from the elements. Yet because it is a specialist coating, it has the advantage of allowing the most distinctive feature of wood, its beautiful natural texture, to show through. General: Ensure the timber surface is suitably prepared, clean and dry, with dust, dirt, wax and grease removed and allowed Tinted colours cannot be cancelled or returned as they have been mixed to your specific requirements. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish. Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced.